How to Replace a SAAB Key Fob

Dealers can charge you hundreds of dollars for keys that aren't functioning properly. But you can fix it yourself for less.

You'll need a small flathead screwdriver to cut the case open and get to the electronic components inside. A multimeter is also needed to test the battery.

Battery

Most key fobs activate whenever you press a button either to unlock or lock the vehicle (or to start it in the case of keyless ignition). This is due to the fact that they have batteries inside, which sends an electronic signal to the vehicle to inform it that you're near enough to operate the starter button. If your starter button begins to behave in an irregular way, it's possible that the battery is worn out and must be replaced.

It's a simple process, but be careful to ensure that you don't damage the electronics inside the fob. If you aren't sure what size battery your fob needs, look for a sticker or other marking on the back of the key fob which shows what it needs. You can also use a multimeter to test the battery that is old and determine whether it's still in use.

Remove the old battery and replace it with a new one once you've identified the correct one for your key fob. Then you can snap the two pieces of the fob back together and you'll be good to go. Purchase a few additional batteries to have them to use in the event that the battery inside your key fob is lost saab key or worn out. You'll be able to avoid having replace the whole key fob in future.

Electronics

All key fobs that lock and unlock your car remotely are equipped with a battery. Depending on the frequency you use your key fob, it's not unusual for the battery to fail or for the electronic components in the key fob to wear down. Replace your SAAB key fob's battery as soon you can to avoid it being locked and unlocked accidentally in the car.

Fortunately replacing the battery or electronics in the SAAB key fob is a simple process. You don't need any special tools or equipment and can do it yourself when you know what you're doing. But, you must be cautious when taking the electronic components from the case of your SAAB key fob, as they can be damaged if you force them too to hard.

It is very common for owners of SAAB 9-3 cars to lose their primary working key. It can cost a lot of money to get replacement keys from a dealer, and you may have to wait weeks for the keys to arrive. There is a much cheaper way to get a brand new key for your car: our Oakland mobile SAAB key locksmith will cut you a brand new Toyota key and program it into your immobilizer.

A new Toyota key is about $120, which is a fraction of the price that dealers charge. You'll also save money by towing the car to the dealer and the time it takes to wait.

Reprogramming

You may need to replace your manual key. It's a simple procedure that doesn't require any special tools. Insert a flathead into the slot that is in the middle of your case. Then gently open the case and you'll be able to remove the old key fob. The battery and electronic components can be removed easily, however, you'll need take care not to damage any plastic.

It was the case that it was no wonder if you could steal your neighbor's Volkswagen Golf 2. Using sophisticated technology cars are now much harder to hack. The electronic chip in the car keys is the culprit, not the metal part of the key. This is why it's a good idea obtain a spare key fob, or reprogramming an saab key fob.

The cost of reprogramming a key fob will vary dependent on the year of the car and model. You should talk to an expert locksmith near you and provide the year model, year, and year of your vehicle for an accurate estimate. This will help you determine whether the cost is worth the cost. You should also get an emergency key just in case you lose your other keys. It will save you lots of time in the future.

Take out the manual key

All modern key fobs, whether they're used for car keys or to start the car with a push-button, have backup keys within. They can be used as a physical key in case your fob's electronic circuits fail or become damaged. If you have one of these key fobs and you are noticing that it isn't unlocking your car as quickly or sending a signal to the vehicle that lets you know when you press the starter button, then the backup key you have is dying.

There are some quick fixes that can be done to help with this problem however in the long the long run, you'll need to replace the battery as soon as you can. Replacing the car key fob battery is actually fairly simple and there are several YouTube videos that can guide you through the procedure step by step.

It is possible to replace damaged parts or perform other extensive repairs to get your fob functioning again. It could be a cracked or oxidized circuit board, or tiny electronic components that are not fully attached to it. If you're concerned about the cost of repair or replacing your saab key fob (133.6.219.42), you can ask your mechanic for suggestions on the most affordable solution for the issue.