How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add a second key. This requires the use of a handheld computer, known as Tech-2 which is to be used by the dealer. Then a new car key and transponder are required to be purchased and then programmed into the car.

Rotate your keys to prevent one from wearing out quicker than the other. This will also help keep your keys in pristine condition.

Replacement Case

Contrary to the classic Saab keys of the past keys, the modern key fobs contain electronics which makes it difficult to create a duplicate. This has made stealing car keys much more difficult than twenty years ago. However, it has also made the replacement saab 9-3 key of lost keys a much more expensive undertaking.

Every owner of a saab key fob programming 9-3 needs to have at minimum two working keys. If one gets lost, it is expensive to purchase a new one for the car, as it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.

There are ways to cut down on these costs. Some parts retailers will search for the code on a spare key (usually the same one that opens the doors and switches the ignition) and cut a brand new metal key blade at only a fraction of the dealer's cost. The key must, however, be the same as the original to work correctly in your vehicle.

You can also replace the case yourself by following these steps. You'll need a flathead and a lot of patience. With the screwdriver you can pull apart the plastic, and then take off the emergency key. Once you have the case open, take the electronics out and place them inside the new case. Make sure you put the correct key and badge back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to replace the battery of the remote key fob in only four steps. This tutorial is suitable for any modern saab-type key fob, however the procedure might differ slightly.

The button is typically located close to the Saab logo on the back of the fob. This button is usually located near the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be enough to open the case so that you can replace the battery.

Once you have installed the batteries CR1632, it is possible to restore your remote key fob. Then, you can program it into your car. The entire process should not be more than an hour. This is a simple procedure that doesn't require special tools.

If you lose your key, the procedure will be more complicated but it is still able to be completed. The dealer needs to first determine the VIN of the vehicle and then order the replacement TWICE module as well as key blade that is matched to the unique code. After that, they will need to cut the replacement key and then program it using a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it's got a battery inside. The batteries are able to last for and will eventually expire. This is a typical issue that happens to all cars and the good news is that you can replace the batteries in many key fobs without replacing the whole case. You can purchase fobs replacements on Amazon that have all the electronics already installed, so you'll be able to just pop open the case and replace the batteries that were in the case. You'll need to take out the emergency key before you replace the batteries. To do this, insert an small screwdriver with a flat head into the slot in the middle of the. The case will split once you work the screwdriver all around it.

When you are ready to replace the keys make sure you have a spare as this can reduce the total cost by a significant amount. If you have an additional key, ask the dealer to cut it and program it for your vehicle. This is much less expensive than buying a new key fob.

It is possible to add another key to your car in the event that you don't have one, however it requires lots of research and Saab Keys work. The cost for adding a second key is about a few hundred dollars and it also requires the programming of the car's computer. This can be accomplished by a professional, but it's an expensive option for the majority of owners.

Replacement Ignition

The latest SAAB 9-3 is a more sophisticated alarm system based on a key code. If you lose your primary key, it may be costly to replace it with another one since the car must have a special computer added and be programmed to accept a brand new key. Most locksmiths can't do this and even a dealer will charge several hundred dollars to program the new key!

Dealers will charge you a premium to replace your car computer (also called the CIM or SAAB twice) If you lose your only functioning key. We can reprogram the current EEPROM of your car's computer so that it's ready for an additional key. This will save you more than 50% of what you would have to pay an auto dealer.

If you've been a long-time owner of an 03-11 SAAB 9-3, then you likely have noticed that the ignition switch isn't the most robust. If your ignition key is not functioning properly, you must consider replacing it. They can become extremely sticky and the buttons are known to fall off. It's not as difficult as it appears to replace the ignition key. With the right tools, it is able to be done quickly.