How to Replace a Saab 9-3 Key

The saab replacement key programming 9-3 is a great car that offers a lot of driver appeal. It has good visibility and saab 900 Key a strong performance engine. It has a very high safety rating.

It is important that you have two keys that are compatible for your vehicle. It could be costly to replace a key if you lose it.

How to Replace the Ignition Key in the Saab9-3

If your car's keys won't engage in the ignition it is time to replace it. This guide will show you how to replace the ignition key on a Saab 9-3. You'll need a replacement key as well as a reprogrammable battery, and a new key-fob cover.

Contrary to earlier models, modern Saab cars have transponders in the key-fob, instead of a physical key to unlock and start the vehicle. The issue with this is that the reprogrammable batteries in the key-fob can wear out and won't hold a charge for long. This is especially true if you keep using the same key for the same lock.

A professional locksmith can change the battery quite easily. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to separate the key-fob. This is accomplished by inserting a flathead screwdriver in the slot located in middle of the case. It is important to work slowly, since the plastic is thin and can easily be damaged.

After the case has been opened, you can prepare the new key by combining the lower part of the key that was used previously with the banana and transponder on the new key. This will ensure the new key is correctly paired to your CIM, which can make a big difference when replacing the sole key for your Saab 9-3.

How do you replace the ignition Key on the Saab 900

If you don't have two keys, you'll need to take off the dashboard and steering wheel to get to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off all trim pieces and dashboard pieces that surround the steering wheel. Once the dash is removed, you can insert an opening with a screwdriver behind the ignition switch.

The ignition cylinder is equipped with a key lock that could stop the vehicle from starting if it doesn't have the key inside it. If the ignition switch isn't working properly, check to see if the key is in the lock or snared in the barrel of ignition. It is also recommended to rotate your keys and keep them clean to avoid being bent.

saab 900 key cars are different from other vehicles in that they don't use traditional keys made of metal. Instead, the car recognizes the electric signals of the key fob through a special chip in it.

If you lose your only working key fob the dealer will charge you top dollar for replacing your computer module (known as the CIM). We can reprogram the EEPROM of your computer to allow it to accept new keys, without the need for replacement. This will save you up to 50% of the price the dealer charges! This is the SAAB KEY PROGRAM. Learn more about it here!

How to replace the ignition Key in the Saab9-5

The metal portion of a traditional Saab key is easy to copy, and not much of a deterrent against vehicle theft. The real protection comes from the electronic part of the key-fob, which contains a chip which recognizes your car once it's inserted into the ignition switch.

Saab's anti-theft device has been relying on this technology for more than 10 years. It's not as effective as a physical lock for your door however it makes stealing your car a lot more difficult. Every Saab owner should keep an extra Saab key in their vehicle.

Most new Saabs come with two keys at the factory, but you can add more at a dealer through a special handheld computer called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 vehicles which have more modern, more advanced features that require the use of a key-fob.

If you lose all keys, the dealer will replace your CIM or TWICE modules, and charge you a premium for it. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.

How to replace the ignition Key in an XC90 Saab

If your SAAB 9-3 key fob begins having problems turning the barrel of the lock, it may be time to replace it. The process is rather simple and doesn't need you to visit an agent. You can do it at home with just a few simple tools.

First, you'll need to prepare the new keys. Before you begin, disable the anti-theft system by placing blocks underneath your rear wheels, and then releasing your handbrake. Insert the key into the ignition and then turn the key to the "on" position. This will activate the accessories but it will not start the engine. Repeat this 5 times, and then put the key on the "on" position.

You'll then need to purchase a new case for your key fob. You can get these at any auto parts store, and they're typically very affordable. Based on the model, you may even buy them without electronic components.

To open the case, gently push the screwdriver with a flathead into the slot in the middle. Once you split the case, you'll have access to all the internal electronics. Use a flathead screwdriver to gently pull out the electronics.