How to Do a Broken Car Key Repair

You're rushing to get to work, and put your keys in the ignition. You try to turn the key, but it snaps in the lock.

Luckily, there are a few options you can try to fix it before calling a locksmith. Here are some quick fixes. Super Glue.

1. Contact for a locksmith

One of the most devastating things that could happen to the owner of a remote car key repairs is a broken key inside the lock. This can be particularly frustrating when the driver is trying to get somewhere, or pick up a kid. In this case it is crucial to act quickly and attempt to free the stuck key.

It is recommended to contact an experienced locksmith for this task as they can use the appropriate tools to remove the broken key without cause damage to the lock. Many people look around the vehicle for something small and rigid like a paperclip, or toothpick, however this isn't likely to work as it is too thick to enter the lock.

A much better solution is to find an tweezers set, as these are quite thin and can easily reach the key hole inside the lock. They should also be rigid enough to grasp the broken part of the key and pull it out. If you don't have tweezers, it might be worth searching for key extractors which are typically sold in auto parts stores. They are narrow, flat and have tiny hooks. They can be inserted through the keyhole to grab the broken part of the key.

A magnetic key hook can be used to attach to the metal of the lock and then pull it out. This isn't always a good idea, as it can sometimes become stuck under the lock and cause further damage to the lock. In this case it is advised to contact a locksmith.

Some people will try to join the two pieces of their car key that have snapped together with superglue, as it can aid them in get it out of the lock. However, this can be extremely risky since the pieces of metal could snag on to each other and then break apart later. It is also essential not to turn the key as this can cause further damage to the lock or the ignition cylinder. It is best to contact a professional locksmith who will be ready to take out the damaged key and then make a replacement on the spot.

2. Drill a Hole

Sometimes a key is broken inside the lock, and even if you have an extra key, you may not be able to gain access to your vehicle. A drill may be the best solution in these instances.

First, you need to ensure that the key hole is set to take a basic tumbler car key. If it's not, you won't be able to drill out the pins without damaging the door and possibly damaging the lock mechanism.

It is crucial to remember that you will drill through an outer plastic layer as well as an inner layer of metal. A small drill bit is enough to penetrate these layers, but you need to ensure that you don't go any deeper than that. If you drill too deeply it could cause damage to the wiring harness or cause the drill bit to stick inside the hole.

It is also recommended to wear a mask and protective gear when working using a drill. This will prevent dust and dirt from entering your lung.

It is an excellent idea, if the broken key piece is still sticking out of the lock, to have two pairs of pliers and tweezers handy. If the key is extending enough to be held by tweezers and pliers, then this is enough to pull it out. If not, you'll need to use a tool like this to wedge it in the lock, and then rotate it towards the key to grab it and pull it out.

3. Drill a Nail

If you smash your car key in half, it can cause you to be in a bind. Luckily, there are a few ways to fix it, without having to pay for locksmith. The first thing you can do is use the screw or Broken Car Key Repair nail. They can be found in your home or at a local hardware store. It is recommended to pick the nail that is as thin and long as you can. This way you can fit it into the hole, and then use epoxy to link the two pieces. Make sure that the back of the nails are flat. This will help it to fit into the cut slot of the key. This will keep it from moving and possibly breaking again in the future.

4. Super Glue

A lot of motorists make use of DIY techniques such as using super glue to try and fix a broken remote car key repair key, however this is not a safe way to go. You could end up damaging the lock and having to pay more for replacing it from the dealership or a locksmith.

First, you need to take a look at the keys that are broken and make sure that they are identical in terms of size. This is essential to ensure that the pieces will be aligned properly and the key will fit into the lock after they are bonded together. Then, use the fine-grit sandpaper or a metal file to smooth out the edges on the damaged pieces of the key. This will improve the glue's bond and reduce the chance of a key that is loose.

After polishing the edges after polishing, apply the smallest amount (about an amount of pea-sized) of super glue to one end. Use only a small amount of super glue, since excessive amounts can make the key too thick. It will then be difficult to fit into the lock. After that, carefully align the two pieces of the key and press them together. After several seconds the glue will begin to set and join the key pieces together.

Another common household item that can be used to remove a damaged car key is a paperclip or bobby pin, which can be shaped into a pick-like tool and put into the lock. This technique is especially helpful when the damage is close to or within the keyway or lock hole.

A car key that has been damaged with electronic components will need a new key from the dealer or a professional locksmith. The key must be reprogrammed using a different code, and the chip inside the key needs to be replaced. If the metal or shell of the key fails, you will need to get a new cut. It is not necessary to reprogramme or replace the electronics.