UPVC Window Repairs

uPVC windows are energy efficient and help reduce heating costs. As they get older, however, issues can occur that need to be fixed. This could include damaged hinges, handles or locks.

Wooden window repairs can be fairly simple for DIY enthusiasts to tackle themselves. It can also be cheaper than a new replacement Window Repair.

Cracks

Cracks and breaks in uPVC windows can be a serious issue. If they are not repaired, they can lead to water ingress, less effective barriers against cold weather, and even the possibility of structural damage. It is essential to locate an experienced local builder or door repair service who specializes in the repair of uPVC frames and who has the skills, experience and equipment required to achieve the most effective results. This will ensure that your fracture is repaired quickly before it gets any worse, and you don't need to replace your window unit or glass.

Small cracks in glass can be repaired by using a variety of DIY solutions. Masking tape and superglue are two of the most popular products used to keep glass that has cracked in place for a brief period of time. For cracks that are more extensive the tape might need to extend beyond the crack on both sides to achieve the optimal results.

You can also make use of two-part epoxy for repairing damaged or cracked glasses. The majority of hardware stores offer this product at around $10. Make sure that your workspace is ready before mixing the epoxy. Also, make sure you have all the tools required for the job.

If you find that your lower or upper sash isn't lifting it could be because the cords that connect to the sashweights have been damaged. Fortunately, this is an easy fix that can be done using the ladder and a flathead screwdriver. A damaged dripcap can be replaced at home. Many home centers stock a drip caps that are not rot free and can be easily nailed or caulked to be fixed. Also, if you have a double- or triple-paned window, be sure to make sure that one of the panes are not broken. This is due to the gases that fill the space between the panes contribute to improving energy efficiency and should be retained and not released.

Water Leaks

If your uPVC windows leak, it could ruin the interior of your house and cause costly repairs. Water leaks can also cause structural damage to your home, as well as mold growth. To minimize damage, it's crucial to repair any issues caused by windows that leak as soon as possible.

The most common reason for window leaks is damaged sealant around the frame. The use of silicone caulking can bring the condition of the seal back to its normal condition and stop water leakage. Check for cracks and gaps around the window frame and also the brick or stone wall that surrounds your windows.

A blocked drainage hole or an issue with Flashing are two other common causes of leaking windows. Check that the drainage holes haven't been blocked or Window Repair blocked, particularly after heavy rain. It is also important to look at the flashing around your window to ensure that it is well-sealed.

Lastly, it's important to ensure that your drip cap isn't damaged or rotten. A rotten or damaged drip cap could let water in the window from above and cause damage to your home's structure. Replacing a drip cap isn't difficult and is usually a straightforward process of purchasing a new one and nailing it into the correct position.

A professional can also check your windows for watertightness. They can use a tool to measure the water-tightness of your windows, and make sure they are in compliance with the standards of the industry. If your windows fail the test, you will have to replace them. This is a costly fix but it's worth it for the security and safety of your family.

Sagging

If your windows aren't closing properly, it could cause many issues, such as drafts condensation and a rise in energy bills. It can also be a sign that the windows were not properly fitted when they were installed or that the sealant has stopped working. Fortunately, there are a few things you can do to fix the problem.

The first step is to set up an area with plenty of natural light to fix your window properly. Begin by laying newspaper or an old blanket on the floor to shield it from any drips or splinters that might be coming from the window while you work.

Use a white cloth soaked in a mix of detergent and water. This will ensure you don't leave any color stains on your windows. Mark the the hinge channel on your uPVC window when you are ready to begin working. Then, remove the channel from the frame and fill in the screw holes using epoxy (for uPVC windows) or wood filler (if the frames are constructed from wood). Be sure to smooth the filled hole before it sets.

Install the hinge channel after the holes are filled. Make sure it's aligned with the window jamb and make sure you drill the holes for the new screws about quarter inch away from the original locations.

Next, measure the length of the spindle that protrudes from the underside of the handle and order an alternative online or bring your old one in to an hardware store to get a matching. Then, remove the setscrew from the operator shaft. Smooth it down to allow the set screw to lock onto the shaft. Then, your uPVC windows should be closing smoothly.

Broken Hinges

If your uPVC window hinges have broken or aren't functioning properly then you'll find it difficult to open or close the window. This can cause a security problem and prevent your home from being warm or cool. You can easily get an entirely new hinge for your uPVC window. It's crucial to choose the correct type of hinge for your windows.

The hinges need to be the same size in order to fit into the window frame. The most common hinge for windows made of uPVC are standard 18mm or UPVC 15mm hinges for windows. However, there are special types of hinges for windows that can be used on different kinds of frames such as wooden frames. Choosing the correct window hinge for your windows can assist you in avoiding the typical issues that homeowners face with their windows, such as not closing properly.

There are a variety of reasons your window hinges could have become slack or stiff. The hinges may not be sufficiently tightened. To check this, use an electric screwdriver to locate the friction screw at the end of the hinge. Then loosen it. You can then adjust it by turning it either way.

If your UPVC window hinges are not working as they should, you can contact Preston Glass Fix for a quick repair. Our technicians will examine the condition of your hinges and give you advice on the best solution. We can replace hinges on windows, retension them or install new lock mechanisms to ensure your UPVC windows are safe and secure.

Faulty locks

UPVC window locks and mechanisms are an essential part of home security. they make it extremely difficult to open the window without breaking. It can be a frustrating experience when a lock fails however, you don't have to replace the entire window.

It is often a minor issue that could have easily been avoided by regular maintenance. We suggest having your uPVC window serviced regularly as part of our annual maintenance package in order to reduce the likelihood of any problems.

Modern uPVC windows come with espagnolette locks that work by pushing the nose of the handle across a wedge block then turning the handle to close the lock. They are effective in locking the window, however if they are not maintained properly, over time they may start to fail. We recommend lubricating them with WD-40 a few times per year.

If you find that your uPVC window isn't opening and closing as smoothly as it used to or when the lock isn't working correctly, it could be a problem with locking gearboxes within the frame. This can be difficult to access as it requires the removal of the seals that surround the window frame and removing the handle.

A locksmith that specializes in UPVC repair will be able to diagnose this fault quickly, and Window Repair then replace the broken locking mechanism using a precise replacement. This quick and easy fix could save you hundreds by avoiding the need to purchase new windows.