Peugeot 308 Key Fob Problems and How to Fix Them

If your Peugeot 308 key fob has stopped working after a few days, it could be due to a dead coin battery, water damage and receiver module issues or a damaged electronic chip. These are all easy solutions and you'll be able to get your car back up to speed in no time!

The blade of the key can get worn out and result in an unusable car key. You can easily fix this problem by visiting your local Car Key Man Auto Locksmith to get a new blade installed.

Battery

The battery of the key fob in your Peugeot 308 can sometimes die or become weak enough to send an effective signal to the car. The key fob might stop working and prevent you from locking or unlocking your doors, or even starting your engine. You'll require a new battery for your key fob to correct this.

You'll need to purchase a replacement battery from an auto parts store or your local hardware store. When you purchase the battery make sure that it's brand new and hasn't been on the shelf for too long. A brand new battery is more capacity and can transmit a stronger signal to your car.

After replacing the battery try unlocking the doors and locking them with the key fob. If the doors do not unlock it is most likely to be in the receiver module of the car that can be reset by your local Peugeot dealer.

The chip inside the key fob might be damaged. This could happen if drop your key fob on the ground or expose it to water. The rubber seals that protect your chip from moisture might wear out over time. This is particularly true if you expose your key fob to water for extended periods of time, like submerging it in the ocean or in the ocean. To prevent this from happening you should keep your key fob away of the reach of moisture and away from water.

Water Damage

If your key fob gets submerged in water, regardless of whether you dropped it in the pool or fumbled it into a puddle don't think it's a lost cause. The key fob is protected by rubber seals, however, prolonged exposure to water could damage its electronic chip. Since water is an excellent conductor and conductor, any water that is able to get inside the key fob will cause a chain of short circuits which will eventually ruin the chip. After removing the battery clean its contacts with isopropyl Alcohol and dry it completely before putting it back in.

A dead battery might be the reason your Peugeot 308 won't start. If you have a spare vehicle, jumper cables may be used to get the engine working again. If you suspect that the battery is at fault and it is not working, it should be replaced.

A bad receiver in the car could also block it from receiving the signal from the key fob. It could be a issue with the antenna or wiring, or the key fob may be damaged. It is possible to program a new keyfob for your vehicle if you are using one. If you are unable to solve the issue, call an expert technician. A professional who has been trained in the field will be able to detect the issue quickly and fix it immediately.

Radio Interference

Interference may cause symptoms such as a fob that is not recognized or has a restricted range. The interference can be transmitted or rasmusen.org radiated the latter resulting from power and speaker cables that are too close to electrical components. In general, rerouting cables and moving them away from these components can solve the issue.

It's unlikely that someone is listening in on the key fob's signals to steal your car, but it's possible that the signal has been masked by radio frequency interference. Luckily, this is a simple issue to fix.

If your key fobs that aren't being recognized, try a new battery. Also, ensure that the battery you are using is the proper size and type. Batteries that aren't the correct size can cause damage to your device.

Certain alarm systems from the aftermarket and radar detectors operate on the same radio frequency as your key fob and this could cause them to interfere with your key signals. Beware of attaching these devices to your key fob.

Pairing Issues

The remote keyless entry system has an antenna that receives radio frequency signals from the key fob. If the receiver has developed issues, you will not be capable of starting your car regardless of whether the key fob functions and can be reprogrammed. This problem can be caused in a number of ways, such as a dead battery in the coin-cell, or water damage. The receiver could also be malfunctioning due to an internal or software issue or damage to the key itself.

The battery that powers your peugeot 208 key replacement (you can find out more) 308 keyfob may have failed. You can easily replace this by a new battery however, it's important to choose the right battery for your key fob. If you use a battery that is not correct, peugeot keys it could cause further issues with the key fob, so it is best to choose the original battery or an alternative that is similar in size, voltage, and specification.

Your peugeot 206 key replacement 308 keyfob may not function if associated with an unrelated vehicle. You might have accidentally given your key fob to someone else or the key was used to unlock other vehicles. This can be resolved by reprogramming the key fob using an OBDII scan. The tool will ask you for information about your vehicle, for example, its VIN or engine type. It is essential that you enter the correct information.