How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of special steps to install a second ignition key. This requires the use of a handheld computer called Tech-2 which is to be used by the dealer. Then the transponder is replaced and a key have to be purchased.

It is recommended to rotate your keys so that one doesn't wear out more quickly than the other. This will help keep your keys in perfect condition.

Replacement Case

The new key fobs are not like the older Saab keys. They feature electronic components which make it hard to duplicate. This has made theft of cars considerably more difficult than it was a few years ago. However, it also has made the replacement of lost keys a much more costly endeavor.

Every owner of a 9-3 Saab should have at a minimum two functioning keys. If one is lost it costs a fortune to add another to the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and Saab Spare key $200 to do this.

There are ways to reduce these high cost. Some parts dealers will find the code from a spare key (usually the same one that opens the doors and turns the ignition) and cut a brand new key blade out of metal for just a fraction of dealer cost. The key, however, must be identical to the original one in order to function within your car.

You can also replace the case yourself by following these steps. You'll require an open-faced screwdriver and a lot of patience. With the screwdriver you can pull apart the plastic and remove the emergency key. After the case is open remove all electronics and put them in your new case. Place the key with the correct badge inside the case.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates how to replace the remote fob battery with only four steps. This guide should work with any modern saab key fob however, the procedure may differ slightly.

The first step is to find the button that lets off the backup key on the fob. It is usually located just below the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the small hole in this button. This should be enough to let the fob case open to allow you to change the battery.

Once you have installed the CR1632 batteries, you can restore your remote key fob. You can then program it into your car. The entire process shouldn't take more than one hour. It's a very easy process that does not require any special tools.

The process is more complicated if you've lost the key, but it's possible. The dealer needs to first determine the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it's got a battery inside. The batteries have a lifespan and eventually expire. This is a frequent issue that affects all cars. The good news is that you can replace the battery in most key fobs, without having to replace the entire case. You can purchase replacement fobs from Amazon that come with all the electronics already installed, so you'll be able to simply open the case and replace the old batteries. It's important to note that you'll need to remove the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot that is located in the middle of the case. The case will split as you move the screwdriver around it.

If you're about to replace your keys, ensure that you have a spare, since this will cut down your total cost by a significant amount. If you have an extra key, you can request the dealer to cut the key and program it for your vehicle. This is much less expensive than buying a new key fob.

If you don't have a spare you can add a second key to your car, however this requires a lot of research and effort. Adding a second key costs about a few hundred dollars and it also requires programming of the car's computer. This can be done by a professional, however it's a costly option for the majority of owners.

Replacement Ignition

Unlike earlier Saab automobiles, the new saab key battery 9-3 models have an extremely sophisticated alarm system that is dependent on a coded keys. This means that when you lose your sole working key, adding another one could be very costly since the car needs to have a unique computer module installed, and it also must be specially programmed to accept an additional key. Even a dealer can charge hundreds of dollars to program an additional key if they are unable to do it.

If you've lost only one working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to make the replacement saab car keys, and will charge top dollar for it. We can reprogram the EEPROM on your car's computer to make it ready to accept an additional key. This will save you more than 50% on the cost you pay an auto dealer.

If you've been a long time owner of a 03-11 SAAB 9-3, then you probably realize that the ignition key isn't the most durable. If your ignition key is not working properly, you should look into replacing it. They can become sticky and the buttons have been known to fall off. It's not as difficult as it appears to replace the ignition key. With the proper tools, it can be accomplished quickly.