Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai has a distinct SUV feel due to its larger dimensions. Additionally, the wheel sizes of 19 inches in Ti and ST-L models can be a bit firm at times. The front tyres of the Qashqai may also lose traction on rough surfaces, and the CVT could occasionally show wrist-flexing torque steering.

It is usually caused by an unresponsive coin battery that is easily repaired in a matter of minutes. Make sure the replacement battery is of the same size, voltage and specifications.

Water Damage

One of the main reasons why a Nissan key fob displays the "key ID is incorrect" message is due to water damage. The rubber seals on the key fob protect the electronic chip, but long-term exposure to moisture can cause it to stop working effectively. This is usually the case if you've dropped your key fob into the ocean or a pool pool, but it can be the case if it gets wet from soapy hands or rain.

If your key fob has been exposed to water for an extended period of time, it could need to be cleaned using isopropyl alcohol, or electronic cleaner. In addition, it may require taking to a specialist to repair or replace it.

If your key fob need to be replaced, the procedure is relatively simple. Make sure you've got the correct multipack (CR2032 3V). Then open the back and front cases using the small flathead screwdriver. Remove the metal clips, then remove the old battery and replace it. After reassembling your fob, put the mechanical key back into position and ensure that it is working correctly. If it isn't it, you'll need to bring it to a nissan juke key fob replacement dealer or a professional auto locksmith to repair the key chip. Fortunately, the chip is not usually damaged by water exposure and this shouldn't be a huge expense.

Dead Coin Battery

Another reason why your Nissan Qashqai key fob may not function is that the coin battery has gone dead. The batteries last for about three to five years, however they are prone to failure over time when the fob is dropped often. You could replace the battery but ensure it's the same voltage and same size as the original. If you're using another battery, it may cause the key to have an incorrect key ID which could prevent it from paired with your vehicle.

The most efficient method of replacing the battery on the Nissan Qashqai key fob is by prying open the fob with an small screwdriver that has a flat head. The screwdriver should be put into a small cut on the bottom of the key fob. Simply twist the screwdriver to divide the two halves. Then, take out the old CR2025 button cell battery and replace it with a new one after noting its position on the fob.

Before putting the new battery into place be sure that there isn't any dirt or water damage on the terminals. If so, clean the terminals using small amounts of isopropyl alcohol. Make sure that the pole cables are connected correctly. They should be connected to both the negative and the positive poles of your battery.

Diagnostics of a fault

If your Nissan Qashqai key fob stops working after exposure to clean tap water or rain, it may be a sign of a chip issue inside. You'll need a new keyfob if you are unable to fix the issue by changing the battery. If the key fob didn't work after you dropped it, it is likely that the chip inside was damaged. It is usually possible to get the key fob back to work once again if it is removed and clean the chip with paper towel and isopropyl alcohol and then insert it back in.

A common error that you may see on the dashboard of your car is "Key ID Not Correct." This means that the vehicle cannot recognize the key fob and not allow it to start the engine. The problem can be caused by a variety of things, including water damage, undetectable malfunctions in the circuitry of the key fob, or RFID interference.

If the battery that powers 12 volts in your key fob is broken or Nissan qashqai key fob is not supplying enough electric power it will cease to function. This could affect the Nissan Qashqai's remote keyless system, central locking and the ability to start the engine with the key fob. Check the battery in the key fob in case you are not able to lock and unlock your door manually. You may also try reinserting the battery to reset the transmitter.

Reprogramming

If the key fob was not submerged into saltwater the device should be able to be revived with a simple wash of clean water. You can also clean the electronic chip by using isopropyl or electronic cleaner. If these methods don't work then it might be time to replace the entire key fob by a new one.

If your Nissan Intelligent Key still does not function, there could be a connection issue between it and nissan qashqai key fob your vehicle. To relink it, start by turning the key in the ignition but without starting the car. Keep doing this until you see the hazard lights flash twice. Then, turn the vehicle off and take out the keys.

Open the fob compartment in your vehicle. This is usually located in the door jamb, on the handle of the driver's side, or under an armrest. Find the small "program" button and press it. Once the process has been completed you will hear an emitted sound.

It's time to test your Intelligent Key to the test. Make sure you press all the buttons on the key while you are at a distance away from the car. If the lights flash and the horn sound it means the key has successfully linked to the Nissan. You can also test it near the nissan juke key fob.