How to Replace the Replacement Key Battery For the Saab 9-3

saab 9-3 replacement key owners must follow a set of unique steps to add a second ignition key. It requires dealer assistance using a handheld computer dubbed Tech-2. Then, a new transponder and key are required to be purchased.

Change your keys regularly to prevent one from wearing out more than another. This will also keep your keys in top condition.

Replacement Case

As opposed to the traditional Saab keys of old keys, the modern key fobs have electronics inside which makes it more difficult to make a copy. This has made theft of cars significantly more difficult than it was twenty years ago. However, it has also made replacing lost keys an incredibly costly endeavor.

Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one gets lost, it is expensive to replace it in the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.

There are options to avoid these costs. Some parts providers will search for the code on an extra key (usually the same one that opens the doors and turns on the ignition) and cut a new metal key blade at less than the dealer's cost. The key must be the exact same as the original in order for it to function in your vehicle.

You can also replace the case yourself by following these steps. You'll require a flathead screwdriver and some patience. With the screwdriver, slowly tear the plastic away and separate the emergency keys from the case. After the case is open, remove all electronics and saab fob key replacement put them back in the new case. Make sure you put the correct badge and key back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This DIY video from YouTube Cyclone Cyd will show you how to replace the battery of the remote key fob in only four steps. This guide should work with any modern saab key fob, though the process may vary slightly.

The first step is to find the button that opens the backup key within the fob. This button is usually located near the Saab logo on the back of the fob. Next, use an screwdriver with a flat head to insert into the small hole of this button. This should be sufficient to open the case so that you can change the battery.

Once you have installed the new batteries CR1632, it is possible to reassemble your remote key fob. Then, you can program it into your car. The entire process should not take more than an hour. This is a straightforward process that doesn't require any special tools.

If you lose your key, the process will be somewhat more complex, but it can still be accomplished. The dealer must first read the VIN of the vehicle before requesting a replacement TWICE module and key blade with the correct unique code. The dealer will then need to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is the device that locks and unlocks your car. It is equipped with batteries inside. They have a limited life span and eventually will die. This is a regular issue that happens with all cars and the good news is that you can change the batteries in many key fobs without replacing the whole case. You can purchase fobs replacements on Amazon that come with all the electronics already installed, which means you can simply open the case and replace those batteries that are old. It is important to keep in mind that you'll need take out the emergency key first, and you can accomplish this by inserting the small screwdriver flathead into the slot that is located in the middle of the case. The case will split when you move the screwdriver around it.

When you're ready to replace your keys, ensure that you have spare keys, as this will reduce your total cost by a substantial amount. If you have an additional key, request the dealer to cut the key and program it for your vehicle. This is much cheaper than buying a new key fob.

It is possible to add a second key to your car even if you don't have one, but it requires some research and work. A second key can cost a few hundred dollars, and it requires programming of the car's computer. This can be accomplished by a professional, however it's a costly option for the majority of owners.

Replacement Ignition

As opposed to the earlier saab fob key replacement (i was reading this) cars, the modern SAAB 9-3 models feature an upgraded alarm system that is dependent on a coded keys. This means that if you lose your only functioning key, getting another key can be extremely costly since the car needs to have a unique computer module fitted and also needs to be specifically programmed to accept an additional key. The majority of locksmiths aren't able to do this or even dealers will charge hundreds of dollars just to program the new key!

If you've lost only one working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to create an exchange, and they will charge you a premium price for it. We can reprogram the existing EEPROM in your car computer to make it ready for an additional key. This will save you more than 50% of the cost you have to pay the dealer.

If you've been an owner of an 03-11 SAAB 9-3, then you likely know that the ignition key isn't really all that durable. They can get extremely sticky, and the buttons can fall off occasionally It is recommended that you consider purchasing a new one if yours isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it sounds and is fairly easy to do using the proper tools.