patio door lock repairs (simply click the next document)

Over time, patio doors experience wear and tear that could lead to lock malfunctions. There are fortunately, a number of easy and efficient methods that can restore your uPVC patio door's security.

These quick fixes can make your home safer no matter if you adjust the lock or clean the locking mechanism.

Clean the Lock

Patio doors are ideal for letting the outdoors in while keeping out the elements. However they could pose an issue for security if the lock doesn't work properly. With time, wear and tear, hot and cold weather dirt and debris can cause your patio door lock to become difficult to operate. With a little attention you can ensure that the lock on your patio door always functions correctly.

It is important to first clean the patio door lock as well as all moving parts. This will help remove any dirt or coatings that could be preventing your lock from working properly. Start by wiping the moving parts on the lock for your patio door with an aqueous cloth. Then apply a scouring pad or a damp, rough cloth to scrub the areas that are soiled of the door and frame. Then wipe the lock using a dry towel to get rid of any moisture. Let it air dry before using it.

If you have an outdoor door that has pin tumbler latch mechanisms, you can lubricate the lock by applying graphite powdered to the key or using a Teflon-based lubricant such as WD-40 Multi-Use Product. This kind of lubricant is easy to apply and doesn't break down as time passes. If you're unable find the correct lubricant for your lock, make use of a pencil with a larger tip. Place the pencil into the lock, and shake it to distribute the graphite.

Regular maintenance is also essential to keep the tracks of sliding patio doors free of dust, dirt and other debris. These tracks are particularly vulnerable to ice, snow, and other particles, which could cause them to get stuck or to bind. This can make it difficult for your patio door to be opened and closed.

Sliding patio door track rails and rollers can be cleaned by removing dirty or damaged weather stripping and cleaning them before installing it. The same is true to patio door rollers which can be cleaned and sprayed with a non-stick lubricant to help them move freely.

Lubricate the moving parts

uPVC French Doors, like sliding patios, operate by using 3 to 4 or occasionally 5 points locking mechanisms. They include the handle and lock cylinder that is operated by keys. They also require maintenance, and specifically lubrication of the moving parts. This can be done with the use of a thin oil however, never WD40. This should be done at least once a year.

If the hinges aren't causing the issue it could be because the door is misaligned. It could be rubbing or catching the strike plate's opening in the frame. Remove the strike plate, and employ a sharp tool to enlarge the mortise. This lets the latch sit correctly in the hole, and also prevents rubbing or catching on the frame.

While the cylinder is out of the way, measure its width with a book or piece of wood that will fit in the gap between the adjustment screw and the lock. The outer dimension is the distance from the outside of the door to the middle of the cylinder, while the inner dimension extends from the center of the adjustment screw to the end of the cylinder.

Check the lock's width

If your patio door latch is hard to turn, even after cleaning and oiling, it's possible that it's not aligned with the strike plate. Examine if the door is balanced and if the hinge screws are secure However, in many cases shifting the strike plate upwards or downwards can fix the issue.

The latch may not be able to engage properly in the event that the strike of the lock is too small. In this situation, you need to widen the hole with a chisel and hammer. Then test the latch to ensure it doesn't touch the door jamb frame or catch on it.

Before purchasing a new lock, it is important to identify the type of mortise lock you currently have. This can be done by looking at the end faceplate and determining if it is round or square. Then, look at the screw holes on the existing lock and note the size of each. This will aid you in finding an alternative lock that is the same width and will fit perfectly into the hole you have already.

You'll need to locate the mortise lock and examine it for scratches, bends or other damage that requires to be fixed. A damaged or bent latch is more likely to break than one that's not utilized often, so make sure to replace the lock with a brand new one that is secure when you spot any indications of damage or wear.

Once you've decided on the kind of lock replacement you require It's time to start the actual repair. Remove the handle and spindle from the patio glass repair door, and then install the new one. Start by putting in the interior handle, aligning it with the spindle and then fixing it by using the two bolts or screws that secure it. Once the handle's interior is installed, put in the handle that is outside and screw it into place, too. Once you've completed these steps then you can test the new handles to ensure that they can be opened and closed easily and that the latch is catching properly with the strike plate.

Make sure you check the Strike of the door.

The door latch and strike plate are two parts of the lock that work to ensure the latch secures the door. If these parts aren't aligned correctly and the latch doesn't latch the door shut correctly. This issue is usually easy to solve.

First, check the holes in the strike plate's receiving to ensure they are clear of obstructions such as dirt or plastic plugs. Release the screws that hold the strike plate in position. This allows it to move horizontally, but it will not be able to separate from the frame. Then adjust the strike plate to ensure that its holes for receiving align with the latch hooks on the door latch. Once the strike plate is adjusted then tighten the screws and then test the door to see if it shuts smoothly with the new adjustment.

These plates are difficult to reach for homeowners who repairs sliding patio doors have sliding patio doors. However they are vital to lock and unlock your door. The metal plates are typically located on the top and bottom of the door jamb, where they support the door's latch. The door latch slides into the strike plate to create an airtight seal when closed. If the strike plate is damaged, rusted, or is not installed correctly, the latch may not properly lock the door.

A misalignment between the latch and strike plate is the most common reason for a patio lock to not close or stay. The most effective way to test for this is to perform the "lipstick test." Apply some lipstick on the edge of the deadbolt and attach masking tape over it. The lipstick will leave a mark when you close the door. This will reveal exactly where the latch meets the strike plate. If the mark is too high or low it is possible to adjust the strike plate.

If your sliding patio door locks aren't working correctly they can help keep your home safe from burglars. It is imperative to repair patio doors the issue as soon as possible. Follow these simple steps to repair your patio door lock and restore its function.