Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and UPVC window repair replace the old panes. In this situation you'll need source some plastic spacers that assist the new pane to fit properly into the window frame.

If you're planning attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from entering your property until a professional comes out to fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is large, you might be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sliding. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act when you realize that your upvc window repair windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can reach the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the loose uPVC window handle yourself. The first step is to close the window and then perform an experiment fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with a breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is essentially a simple procedure, but it is easier to do when you have a person to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window repair near me improperly or by a poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you suggestions.

It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form where the sash joins the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to have them realigned or replaced. In addition, the interlock could be unbalanced. This is located on the hinge's side and may need to be cleaned. In some instances it might be necessary to replace them.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be placed on top of your windowsill. They will help block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair windows made of upvc will provide excellent security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and they may reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your Upvc window you should consult an expert as soon as possible.