Fiat 500 Key Fob Replacement

If your 500 key fob isn't working Try a different one to see if the car will detect it. If it does, the problem is most likely due to the original fob's battery, or water damage.

Replace the battery first. Make sure the new coin cell battery is properly inserted with the "+" side facing down inside the fob.

Dead Battery

Most of the time when a fob doesn't work, it's because the battery is dying. It's not difficult to fix and the majority of fobs will notify you that the battery is running low. You can find the instructions on YouTube for almost every key fob on your vehicle or in the owner's manual. You can also replace it by taking it to an authorized locksmith or a dealer who has sold it to you.

Sometimes, a device stops working due to a glitch on the circuit board inside. It's not a common occurrence but it is possible to occur. If you dropped the fob on a hard object, it could cause damage to the internal chip. It can also happen if you are using an aftermarket fob, and the key doesn't work. In this instance you'll be required to go to an authorized locksmith or dealer and have it reprogRammed to work with your 500.

One 2012 FIAT 500 Flip Key Remote - resembles Ilco brand with lock, unlock and trunk buttons - new replacement keyless entry remote (will need to be cut and programmed by a locksmith)

Damaged Chip

A key fob from fiat key fob not working 500 is a wireless device that provides the signal to the car to start after you press the button. It's equipped with a microchip, which contains the information which is required to communicate with the car. If the chip is damaged, it won't transmit the correct code, and the car won't begin. It is possible to repair this kind of damage and a locksmith can help. United Locksmith can complete this repair on both classic and modern models, so do not hesitate to contact us.

A locksmith can program an entirely new key fob. It is cheaper to do this rather than going to the dealer, and it works the same way. You'll need some details to the locksmith, like the year in which your car was manufactured and the model.

If you are not sure of the best solution to this problem try scratching the chip with a US dollar bill. The copper in the bill is abrasive and will remove oxidation and dirt. However, it will not harm the microchip. If the chip is physically damaged it might not be in a position to be repaired. This could happen if drop it, run it over by your vehicle, or some other kind of physical strain.

Water Damage

If you've accidentally dropped your keys in the pool, threw them in your purse while swimming at the beach, or splashed them with water on a wet day it's likely your key fob is likely to suffer water damage. Even if it's just some water on the keys, this could cause serious problems for its electronics and hinder it from functioning properly.

The good news is that it is possible to solve this issue by taking off the fob's key and using a the paper towel to cleanse it of any dirt or water that remains. Once the fob is dry and is dry, you can replace its battery. It should then start working again.

You can also take your fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These experts can make use of special equipment to ensure that the key fob is compatible with your car's computer.

When your Fiat 500's key fob isn't working, it can be stressful and disorienting. It can be expensive and cumbersome to take your key fob to a dealer. Locksmiths can replace your key fob with no need to visit the dealership. Locksmiths are more reliable than a dealer since they can handle every aspect of your car's key fob replacement without the requirement for a dealership visit.

Pairing Issues

If you lose your key fob, or it stops working but there's nothing the issue, it could be the chip that has gone off the rails. This could be due to water damage or an unresponsive battery.

Most of the time, this can be accomplished by following the directions in the owner's manual. However, it's a good idea how to unlock fiat 500 boot without key have a locksmith from your automotive do this if you're having issues or the instructions in the manual don't work for you. This will ensure that the chip isn't damaged, and is the most affordable option.

Another issue facing 500 owners is that the key fob will not lock the car. This can be a big issue if you're driving to a gas station and want to fill up. Some owners have complained that their 500's locking system has malfunctioned and they've had to replace the entire intermediate steering shaft. This issue was cited in a technical service bulletin (TSB) from fiat a602 key.

If you're experiencing issues with your Fiat car, the services of a reliable locksmith can help. They can duplicate your key or make you a brand new one that is able to lock and start the car. They can do this without having access to your old key, and it's typically cheaper than buying one from the dealer.