How to Replace a Saab 9-3 Key

The Saab 9-3 has a good variety of appeal to drivers. It is well-lit and has a strong performance engine. It has a very high safety rating.

It is vital to have two keys that are compatible for your vehicle. If you lose the only key, it can be very expensive to add another one.

How to Replace the Ignition Key in the Saab9-3

If your car key won't engage in the ignition you must replace it. This guide will guide you through how to do it on the Saab 9-3. You'll have to replace the key, purchase another reprogrammable device, and then purchase a new casing for your key-fob.

Most modern Saab models make use of a transponder instead of a metal key to unlock the car and then start it. The problem with this is that the reprogrammable battery on the key-fob can wear out and not hold a charge anymore. This is particularly true if you keep using the same key on the same lock.

The good news is that it can be replaced easily by an experienced locksmith. You can also do it yourself if you have the right tools and a bit of patience. The first step is to separate the key-fob. This is accomplished by inserting a flathead screwdriver in the slot in the middle of the case. It is important to work slowly, since the plastic is extremely thin and easily damaged.

When the case is opened and you are able to prepare the new key by combining the lower part of the previous key with the banana and transponder on the new key. This will ensure that the new key is connected to the CIM correctly, which could make a big difference when replacing the sole key for your Saab 9-3.

How do you replace the ignition Key in a Saab 900

If you do not have two keys, you'll have to take off the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, it is possible to remove the trim and dashboard pieces that surround the steering wheel. After the dashboard is removed, you can push a screwdriver into the opening behind the ignition switch and pull it out.

The ignition cylinder is fitted with a lock for keys that can stop the vehicle from starting if it does not contain the key. If the ignition switch isn't working correctly, make sure to check if the key is in the lock or is stuck inside the barrel. It is also recommended to rotate your keys and keep them clean to prevent bent.

Saab cars differ from other vehicles because they don't use traditional metal keys. Instead, the car is able to recognize electric signals from the key fob through an specialized microchip inside.

If you only lose one working key fob, your dealer will charge the cost of replacing your computer module (also called the CIM). However, we can reprogram your computer's EEPROM, and then prepare it to accept new keys without replacing it. This can save you over 50% of the cost the dealer charges! We call it the SAAB Key PROGRAM. Find out more about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal part of a classic Saab key is easy to duplicate, and it's not much of a barrier against theft of a vehicle. The electronic component of the key-fob is equipped with a chip that recognizes the car when the key is put in the ignition switch.

Saab's anti-theft system has relied upon this technology for over 10 years. It's not quite as effective as a physical lock for your door but it does make stealing your car a lot more difficult. This is the reason why every Saab owner should always have an extra key available.

The majority of new Saabs come with two keys, Keys but they can be added by the dealer's expense using a handheld device known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 models, that have more modern, more advanced features that require a key-fob.

If you lose all keys, the dealer will replace your CIM or TWICE modules and charge the cost of replacement saab car keys (Chessdatabase.science). However, we can reprogram the EEPROM in your existing computer and set it up to accept new keys, without replacing the expensive modules.

How to replace the ignition Key on an XC90 Saab

If your saab replacement keys 9-3 key fob begins having problems turning the barrel of the lock It could be the time to replace it. The procedure is relatively simple and doesn't require you to visit an agent. You can complete the process at home with just a few simple tools.

First, you'll need to prepare the new key. Before you start, disable the anti-theft system by placing blocks underneath your rear wheels, and then releasing your handbrake. Next, put the key in the ignition and turn it to the ON position, which activates the accessories, but it does not start the engine. Repeat this five times, then keep the key in the on position.

Next, you'll need to purchase a new case for the old key fob. They can be found at a variety of auto parts stores and are usually quite affordable. You can get them without electronics, based on the model.

To open the case, insert an flathead screwdriver into the slot in the middle and gently work it. The case will split easily, and when you do, you'll have access to the internal electronics. Use a flathead screwdriver to gently pry out the electronic components.