How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add a second key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then a new car key and transponder need to be bought and programmed to the car.

Make sure to rotate your keys in order to prevent one from wearing out quicker than the next. This will help keep your keys in top condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the latest key fobs have electronics inside which makes it difficult to copy. This has made stealing cars much more difficult than twenty years ago. However, it also has made the replacement of lost keys a comparatively expensive task.

Saab 9-3 owners must have two keys working. It costs a fortune to replace a lost key as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers charge between $100-$200 to do this.

There are a few ways to avoid these expensive. Some parts suppliers will find the code on an old key (usually the same one that opens the doors and turns on the ignition) and saab fob key replacement cut a new metal key blade at a fraction of the dealer's cost. The key must, however, be identical to the original one to function properly in your car.

Follow these steps to replace the case. You'll require a flathead screwdriver and some patience. With the screwdriver, break off the plastic and then remove the emergency key. Once the case has been opened remove all electronics and place them in the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This YouTube video from Cyclone Cyd demonstrates how to replace the remote fob battery in only four steps. This tutorial should work for any modern-day saab Fob key Replacement key fob however the procedure might differ slightly.

The first step is to locate the button that will release the backup key on the fob. It's usually close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver in the small hole in this button. This should be sufficient to let the fob case open to allow you to change the battery.

After you have installed the new batteries CR1632, you can rebuild your remote key fob. Then, you can program it into your car. The entire process should not take more than an hour. It is a simple process that does not require any special tools.

The process is more complicated if you lose your key, but still possible. The dealer will need to determine the VIN of the car and then purchase a replacement key blade and TWICE module, both with the correct unique code. After that, they'll be required to cut the replacement key and then program it with a new software tool called MDI.

Replacement Key Fob

The key fob comes with a battery that is used to lock and unlock your vehicle. The batteries have a lifespan and eventually fail. This is a problem that happens with all cars, and the good news is that you can change the batteries on most key fobs and not have to replace the entire case. You can buy replacement fobs on Amazon that come with all the electronics already in place, so you'll simply open the case and replace those batteries that are old. You'll need to remove the emergency key before you can replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot that is in the middle. The case should split when you turn the screwdriver around it.

If you're ready to replace your keys, be sure to have an extra set on hand. This will save you lots of money. If you have an extra key, request the dealer to cut it and program it for your vehicle. This is a lot less expensive than purchasing a new key fob.

It is possible to add a second key to your vehicle if you don't already have one, but it requires lots of research and effort. The cost of adding a second key is a few hundred dollars, and also requires programming of the car's computer. This can be done by a professional, Saab fob Key Replacement but it's an expensive option for most owners.

Replacement Ignition

In contrast to earlier Saab vehicles, the latest SAAB 9-3 models feature a much more sophisticated alarm system that is built on a key code. This means that in the event that you lose your only working key, acquiring another one can be very costly since the car needs to have a special computer module installed and it also needs to be specifically designed to accept a different key. Locksmiths typically aren't able to program this and a dealer will charge several hundred dollars to program the new key!

If you've lost only one working key, a dealer will replace the computer in your car (known as the CIM or saab 93 key TWICE) to make a replacement, and they will charge you a premium price for it. We can reprogram the current EEPROM inside your car's computer so that it's ready for an extra key. This will save you more than 50% on the cost you pay a dealer.

If you've been an owner of an 03-11 saab 9-3 key programming 9-3, then you likely have noticed that the ignition switch isn't all that robust. If your ignition key isn't working correctly, you should think about replacing it. They can become extremely sticky and the buttons have been known to fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished in a short time.