Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and Upvc Window Repairs the replacement is usually able to fit into the frame of the previous one easily. If windows with double glazed window repairs near me panes are held together by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window repairs near me, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is large, you might prefer security screens that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act when you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll have to open the window so that you can access the frame. After that, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and then perform an initial test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with a breeze. These are easily replaced by any competent DIYer and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier to do if you have someone to help hold the frame up.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to provide suggestions.

It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also reduce the risk of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become misaligned due to wear, which can cause an opening where the sash and frame meet. If they're beyond repair, it may be necessary to have them realigned. The interlock may also become disaligned. This is located on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace these.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more efficient to replace them than repair them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.