UPVC Window Handle Replacement

It is easy to repair a broken window handle with the proper tools. It's important to know the type of handle you have as well as the size of its spindle before you purchase the replacement.

Older uPVC double glazing windows replacement feature cockspur window handles which have spurs that protrude to the lock of a wedge cockspur striker plate. They can be left or right-handed and must be to be replaced with the same handle.

What type of lock and handle do I have?

There are a myriad of upvc window locks and handles each with their distinct advantages and functions. The type of handle you have will determine whether or not the locking mechanism you have is effective and also if it is simple to open windows. Over time and through regular usage, the window handles made of upvc are prone to wear or damage. out, making them less secure and effective. In some cases they could even disappear completely. It is essential to fix the handles on your window made of upvc when you begin to notice they are falling off. This will stop possible burglaries, and keep your house secure.

It is a good thing that replacing your window handles made of upvc is a relatively simple task that is achievable by almost anyone. You'll require a few tools, but with right knowledge, it is a straightforward process that should take only a couple of minutes. You must know the type of handle or lock that you have on your window. This will help you choose the right replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They are flat in design and have a latch that engages with the locking mechanism on the frame of the window when it is turned. Inline upvc handles come with a spindle running through the middle of the handle and into the window frame in order to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have an unusual hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the frame and aren't as secure as other types of window handles.

Handles that tilt and turn

As opposed to the other handles made of upvc, tilt and turn handles can be rotated to open the window, and tilted inwards to allow ventilation. They feature a 7mm spindle at the back and are available in left and right-handed versions.

When purchasing replacement handles made of upvc It is crucial to measure the spindle's length as not all are identical in size. To test the length of your handle made of upvc, simply drop something into the middle of the hole and measure how far down it goes before it comes into contact with an obstruction. This is the maximum size of spindle that will fit in your windows.

What is spindles?

uPVC window glass replacements handles function similarly as doors. By turning the handle, you will be able to operate a latch within the frame. This unlocks the window so that it can be closed and opened. The handles could be damaged, particularly if they're frequently used or subjected to harsh conditions. It is possible to replace the handles on your uPVC window if they're not functioning properly.

There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in different ways and each handle type has a particular spindle that is used to lock the mechanism to the window. This is why it is essential to know the kind of handle you have on your uPVC window so you can get the correct replacement.

You can check what type of uPVC handle you are using by taking a look at the base of your handle. There should be a "snap in cover over one screw that holds the handle base in the correct position. Once you remove this and you'll be able to see the second screw that holds the handle base in place. After both screws are removed and you are able to remove the handle from the uPVC.

After taking off the uPVC handle, remove it from the locking mechanism. Note the length of the spindle. You'll need purchase a replacement with the same length as the original handle and the locking device.

The spindle wears down and becomes inoperable with the locking mechanism. This can be caused by corrosion, damage from constant use or an unreliable locking mechanism. If this happens, you will need to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of the handle from the previous one?

Window handles can be damaged or broken over time. It is essential to fix them as quickly as you can to ensure your security. It is simple to replace a damaged or worn handle. The job can be completed in under an hour without the need of special tools.

The first step to remove the handle that was previously used is to remove the screw that is located at the top of the handle base. Once this is removed the handle will be pulled away from the base. A second screw will be situated at the base of the handle. It can also be removed. Once both of these screws are removed, the handle can be removed completely from the base section of the window.

Once the old handle has been removed, take the new handle and line up the fixing holes with the holes that are currently in the window frame. If there is a sticker or cap on the new handle, remove it if required and screw the handle into place. It is important to check whether the handle functions after it is installed. Turn the handle and make sure the lock mechanism is in place.

Espag handles have an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hang over the outer frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, you can insert the spindle into the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. When the handle is ready for use, open and close the window a few times to make sure it is working properly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't a big deal and the process is simple. All you need is an screwdriver and a bit of patience. First, make sure that the handle is not locked. Then, remove any visible screws. You can also replace them with screw caps. After removing the handle you will need to note the length of the spindle that extends from the back. This is crucial as it will determine what kind of handle you will need to purchase.

Espagnolette handles are the most popular type of handle used on uPVC windows. The spindle passes through the handle to operate the locking mechanism in the window frame. Once the handle is turned it opens the latch on the window, allowing it to open. When used regularly and time, handles made of espagnolette can become damaged.

Cadenza handles are a kind of uPVC handle that is commonly used in tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are more secure than the espagnolette handles because they are able to open from the inside. They can be replaced with the same method as espagnolette handles however you must ensure that the new handle has a curved blade instead of flat ones.

Once you have determined the right handle for you You can simply place the new handle with the screw holes and then screw it in place. Then, put the screws on and test the new handle. You can accomplish this by dragging the handle between the locked position to the unlocked one several times. If you have any issues, it may be worth contacting a specialist to see if they can assist in resolving the issue. They can offer advice on how to resolve the issue in a timely and efficient way.