Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your valuable property from theft. This system is discrete and doesn't require additional key fobs.

The device makes use of buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This will then allow the vehicle to start.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are many kinds of aftermarket security devices, from tracking systems to alarms and immobilisers. Not all of them are equally effective in protecting your car. While a tracking device can assist in finding your vehicle in the event of theft, it will not stop the crime from happening in the first instance. Immobilisers, on the contrary, do exactly what they say on the tin - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car The ghost immobiliser cost device generates an unique sequence that must be entered before the engine will start. This can be accomplished by using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This feature is particularly useful if you need to surrender your car for valet parking or servicing, as the immobiliser will still be active and not deactivated.

The ghost immobiliser fitter is an unique and innovative device that works with the buttons on your vehicle rather than as a separate unit. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used on future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your pride & joy from key cloning and hacking. It also blocks ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices which are a typical method used by car thieves to circumvent immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It cannot be detected using sophisticated RF scanning and code-grabbing technologies and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create a an unique sequence of disarming. This sequence can be extended to 20 or more presses for additional security. The iPhone app allows only one, authenticated connection using a pairing code that is unique to the Ghost and the communication between the two is encrypted.

The Ghost stops car thieves from adding an ignition key that is not in use or replacing the ECU to bypass the immobiliser. The engine can only be started only if a valid PIN has been entered. It is possible to operate temporarily in valet or service mode (with the appropriate parameters, like 30mph speed limit), so you can hand your car to an attendant or valet without needing to enter the code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting up normally until you enter a custom code. The system can be turned off or on through your smartphone's app, without the need for additional wires.

Standard factory immobilisers for vehicles function by using an electronic transponder in the key that transmits a signal to the ECU. If the correct code is sent, the car will start however, if the transponder is replaced with one from another vehicle the immobiliser won't recognize it. This allows the vehicle be started and stolen. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It guards you against hacking or key cloning and even key theft. Only by physically towing your car away could a thief steal it and not be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk, steering wheel and door panels to generate an unique, changeable PIN code sequence that must be entered before you can drive. This is done without additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves cannot utilize sophisticated RF scanning or code grabbing technology to determine if security systems have been installed.

ghost alarm installation Near me is harder to remove than car alarms that require disarming using several buttons. This makes it a fantastic complement to a GPS tracking device that can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You don't have to look very long on social media sites to find stories or videos of cars that have been stolen using the most advanced technology tools. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.

The Ghost immobiliser helps combat this and provides you with an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It is created by creating a unique pin code push sequence from the buttons you have on the steering wheel, door panel, and centre console. The unique pin code must be entered together with your original key fob to prevent the vehicle from getting started. The unique override pin can be located on a black card that you receive following your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, so it can't be identified by modern criminals using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to an electronic device for tracking.

Unlike most other security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending the use of a digital block of commands to both the ECU and the engine.

They can also be linked to an analog alarm immobiliser, tracker or alarm. This must be specified prior to the installation. They are also service/valet mode-compatible and a good alternative to a tracker if you are you have your car checked for an electrical fault at the dealer.

Service/Valet mode

In recent times, there has seen an increase in the number of cars being stolen without the owners keys. With easy access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to steal your joy and pride. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been cloned.

It communicates directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of a new key or replacing the ECU to bypass the system, since only the correct PIN code will allow the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits must be entered before you are able to start your car.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car from being moved away or even started if a PIN code isn't entered first. If the device is in armed and you try to drive off it will display a warning on your dash which will flash continuously for about 300m, if you enter your PIN code during this time, it will disable the anti-hijack and your car will continue to operate as normal. If you do not enter your PIN at this time the indicator will continue to flash and require a new pin code every time you try to start your vehicle.