UPVC Window Handle Replacement

Replacing a broken window handle is a simple process and, with the right tools, it can be done quite quickly. It is important to know the type of handle you have and its spindle size before purchasing a replacement.

Older uPVC window handles have a spur which protrudes and locks on a wedge striker. They can be left or right-handed and need to match when replacing.

What type of lock and handle do I need?

There are a variety of window locks and handles made from upvc each with its own advantages and purposes. The kind of handle you choose will determine the ease to open your windows and if the locking mechanism functions in the way you want it to. With time and regular use, the upvc handles on your windows may be damaged and worn out. This makes them less secure and less effective. In some instances they could even be completely removed. If you find that your window handles have fallen off, it's important to fix them as soon as possible. This will help to avoid burglaries and keep your home safe.

Luckily, replacing your window handles made of plastic is a relatively simple task that can be completed by nearly everyone. With a few basic tools and the right knowledge it's a simple process that shouldn't take more than a couple minutes. You will need to know the type of lock or handle you have on your window. This will allow you to choose the correct replacement.

Inline Espagnolette Handles

These are the most commonly used type of upvc handle and are typically located on the outside of your window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are held to the frame of the window with one screw, and are less secure than other varieties of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles in that they can be turned for opening the window, and then tilted into the window to allow air circulation. In general, they have a 7mm spindle on the back of the handle. They are available in left and right-handed versions.

It is important to measure the size of the spindle when purchasing a new upvc handles. There are a few that are exactly the same size. To test the length of your upvc handle simply drop something in the middle of the hole and replacement upvc window handles measure the distance it travels before it reaches an obstruction. This is the longest spindle length that will be suitable for your window replacement Glass.

What is a spindle?

uPVC window handles work in a similar way as doors. By turning the handle, you will be able to open a latch in the frame. The window then opens and shut. These handles can be damaged, particularly if they're often used or are exposed to harsh conditions. You may need to replace the handles on your uPVC window if they are not functioning properly.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed to fit into the uPVC frames in different ways. Each handle uses a specific spindle to lock the mechanism into the window. This is why it is essential to know the type of handle you have installed on your uPVC window so you can get the correct replacement.

You can find out what kind of uPVC handle you are using by taking a look at the base of your handle. There should be a "snap-in' cover over one screw that holds the handle's base in the correct position. When you remove this cover you will be able to see the screw that holds the handle base in place. After both screws are removed, you should be able pull the handle from the uPVC.

Once you have removed the uPVC window handle, you will need to carefully unscrew the spindle that was previously attached to the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the original handle and the locking device.

The spindle wears out and cannot operate the locking mechanism. This can be due to wear and tear from continuous use or a loosening of the locking mechanism or even corrosion over time. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Window handles are susceptible to being damaged or even broken over the course of time. It is crucial to repair them as quickly as you can to ensure your security. It is easy to replace a damaged or worn handle. The task can be completed in under a minute without the need for any special tools.

The first step to remove the old handle is to remove the screw located at the top of the base of the handle. Once the screw has been removed, the handle will be pulled away. There will be a second screw that is located at the bottom of the handle base, and it is able to be removed as well. Once these two screws are removed, the handle can be detached from the base of the window.

After removing the handle, align the fixing holes of the new handle to the existing holes in the window frame. There may be a little cap or sticker on the new handle, so take them off the caps if needed, and then screw the handle in place. It is crucial to verify whether the handle functions after it is put in place. Turn the handle and make sure the lock mechanism is working.

Espag handles come with an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism inside the frame of the window. Cadenza windows feature a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame of the window or the transom bar crossmember.

After you have put in the new handle, place the spindle into the window lock and tighten it. Once the handle is securely fixated and secured, replace the snap-in cover and the screw cap (if necessary). The handle is now ready to use to use, so try opening and closing the window a few times to make sure that it works properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is simple. All you require is a screwdriver, and a small amount of patience. The first thing to do is ensure that the handle is in the unlocked position and then remove any screws that are visible, you can replace them with screw caps if needed. After the handle has been removed and you are ready to take an note of the length of the spindle that extends from the back of the handle. This is crucial since it will determine the kind of handle you'll need to buy.

Espagnolette handles on uPVC are the most well-known type of handle. They have a spindle that is connected to the handle and operates a locking mechanism within the frame cost of windows replacement the window. The handle releases the latch, allowing the window to open. With time and regular use, espagnolette handles could be damaged or damaged which is why it is essential to find a replacement.

Cadenza handles are another type of uPVC window handle commonly used on tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism within the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. You can replace them with the same method that you would for espagnolette handles however, make sure that the new handle is angled and not flat.

After you have chosen the right handle, simply align the new handle with the existing screw holes prior to screwing it in place. After that, you should put the screws back on and make sure your new handle is operating correctly. You can perform this by dragging the handle back and forth from the locked position to the unlocked a few time. It may be worth contacting an expert to see whether you can solve any issues. They will often be able to guide you on the best solution to resolve the issue in a quick and effective manner.