Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your valuable property from theft. It is discreet and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses. This will then allow your vehicle to begin.

Simple change of PIN code

With the rising rate of vehicle theft, many owners are looking to improve their security. There are many kinds of aftermarket security devices, from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. While a tracking system may assist you in locating your vehicle in the case of theft, it does not stop the crime from happening in the first place. Immobilisers, on the contrary are exactly what they state on the tin: they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car The ghost device is able to create an exclusive sequence that has to be entered prior to the engine can start. This can be done by using the window, heater or indicator stalk buttons. In addition option, there is an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is an excellent option when you wish to donate your car to valet parking or for servicing. The immobiliser will remain in operation.

The Ghost is a truly unique and innovative device which is used in conjunction with the buttons of your car instead of being a separate device. It is not only an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch bmw m3 ghost installer Immobiliser is a sophisticated security device that shields your vehicle from key cloning and hacking. It also stops ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for additional wiring and has been extensively tested to make sure it works with all vehicles. It also is resistant to jamming devices, which is a common technique used by car thieves to circumvent existing immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The Autowatch ghost 2 immobiliser installation does not use LED indicators and instead uses buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a unique sequences for disarming. You can even make this sequence up to 20 presses long for added security. The iPhone app is limited to one connection, using a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also stops car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start if a valid PIN code has been entered. It is possible to operate temporarily in valet or service mode (with parameters set, such as 30mph speed limit), so you can offer your vehicle to an attendant or valet without needing to enter a code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a specific code. The system can be activated or deactivated by using your smartphone's application without the need for additional wires.

The factory-installed immobilisers function with a transponder which is embedded in the key. This transmits a signal to the ECU. If the correct code is sent the car will start, but if a transponder is replaced with one from another vehicle the immobiliser cannot recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser was created by an South African company at the top of the line in vehicle security technology. It safeguards your car from hacking, key cloning and even key theft. Only by physically towing your car away can thieves take it away and not be able to drive it.

bmw m4 ghost installer makes use of the buttons on your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an individual, changeable PIN code sequence that must be entered prior to you can use your car. This is done without any extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves. It is more difficult to remove than a car alarm that requires disarming with the use of a button sequence. This makes it a great alternative to an GPS tracking device that can be used to track your vehicle after it's stolen.

Override of emergency PIN code

You don't have to look far on social media to find stories or videos of cars that have been stolen with the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original key fobs.

Our Ghost immobiliser combats this and provides you with an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel and on the centre console. This unique PIN has to be entered along with your original key fob to stop the vehicle from beginning. The unique override pin is located on a black card that you receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden within the vehicle's wires and doesn't emit any radio signals, so it cannot be identified by modern thieves using diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to a tracking device.

Unlike most other security systems that use a relay in the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They are also compatible with service/valet modes and an excellent alternative to a tracking device if you take your car into the dealer for an electrical problem.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen without the owners keys. It's more easy than ever to take your joy and pride with the availability of key cloning tools and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your car from being driven, even if your keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent as it doesn't use radio frequency or keys fobs. It isn't detected by diagnostics or any other hacking device. It also stops you from adding an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console & door panels. A unique and changeable PIN code sequence up to 20 digits needs to be entered before you can start your car.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being driven away or started if a PIN code isn't entered before. If the device is armed and you try to drive off it will display an indicator on your dash, which will flash continuously for about 300m, if you enter your PIN code during this time, it will disable the anti-hijack and your car will continue to drive as normal. If you do not enter your PIN at this point, the warning will continue to flash and require a new PIN code every attempt to start your car.