UPVC Window Handle Replacement

It is easy to replace a broken window handle with the proper tools. It's important to know what kind of handle you have and its spindle size before you purchase the replacement.

Older uPVC window handles have a spur which protrudes and locks on a wedge striker. They can be left- or right-handed and must be compatible when replaced.

What type of lock or handle do I have

There are a variety of upvc window locks and handles each with their own advantages and purposes. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism works as intended. As time passes and with regular use, upvc window handles are prone to wear or damage. out, making them less secure and efficient. In some instances, they may even be completely removed. If you find that your window handles have been removed, it's essential to fix them as soon as possible. This will prevent potential break-ins and keep your home safe.

It's a task that anyone can complete. You will need a few tools, but with the right knowledge, it is simple and should take only a couple of minutes. To begin you'll need to identify the type of handle and lock you have on your window, Window Handle Replacement which will help you identify the best replacement.

Inline Espagnolette Handles

These are the most commonly used kind of upvc handle and are typically located on the outside of your window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc window handle replacement handles have spindles that run through the center of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles are attached to the frame of the window by a single screw and are less secure than other kinds of window handles.

Handles that can tilt and turn

The tilt and turn handles differ from other upvc handles because they can be turned for opening the window, and then tilted into the window to ventilate. Generally, they have a 7mm spindle on the back of the handle. They are available in both left and right handed versions.

It is important to measure the spindle size when buying replacement handles made of upvc. There are a few that are the exact same size. Drop something into the middle of the hole to check the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles work in a similar way like doors, turning the handle to activate a latch inside the frame. This unlocks the window so it can be shut and opened. The handles could be damaged, particularly if they're used frequently or exposed to harsh environments. This can leave you needing to replace your uPVC windows handles as they may not be able to operate the window correctly for a long time.

There are several different types of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. These handles are designed to fit in the uPVC frames in various ways. Each handle uses a specific spindle to lock the mechanism to the window. It is essential to determine the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.

The base section of the handle will tell the type of uPVC it is. A snap-in cover is over the screw that holds the base of the handle in position. Once you remove this you will be able to observe the second screw that holds the handle base in place. After both screws have been removed, you should be in a position to pull the handle away from the uPVC window.

Once you have removed your uPVC window handle you need to carefully remove the spindle that was previously attached to the locking mechanism. Take note of the length of the spindle. You'll need buy a replacement of the same length as the handle that was originally used and locking device.

The spindle wears out and becomes inoperable with the locking mechanism. This could be due damage caused by constant use or a loosening of the locking mechanism or even corrosion over time. If this occurs, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove the old handle?

In the course of time and daily use, window handles can be damaged or destroyed, and if this happens it is crucial to repair them as soon as you can to ensure the security of your home. It is good to know that replacing a worn or damaged handle is a relatively simple task that can be carried out in just over one minute and doesn't require any specialized tools.

To remove the handle, first remove the screw at the bottom of the handle. After the screw is removed, the handle can be removed. There is a second screw that is located at the bottom of the handle base, and it can be removed as well. Once these two screws have been removed, the handle can be detached from the base of the window.

Once the old handle is removed, you can take the new handle and line up the fixing holes with the holes present in the window frame. There may be a little cap or sticker on the new handle, so take them off these if necessary and then screw the handle in its place. It is crucial to verify that the handle works once it has been installed. Turn the handle around and ensure that the lock mechanism is activated.

Espag handles come with a spindle that protrudes from the handle and slot into a multipoint locking mechanism in the frame of the window. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hang over the outer frame of the window or the transom crossmember of the bar.

After you have installed the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) after the handle is securely fixed. When the handle is in use, open and close the window replacement a few times to ensure it works properly and securely.

How do I put in the new handle?

Switching your uPVC window handle isn't difficult and the process is quite simple. All you require is a screwdriver, and a small amount of patience. First, make sure that the handle that you are replacing is unlocked. Remove any visible screws. You could also replace them with screw caps. Once the handle is removed, you need to make a note of the length of the spindle that protrudes from the back of the handle. This is crucial since it will determine the kind of handle that you will require to purchase.

Espagnolette handles are the most commonly used type of handle for uPVC windows. The spindle is inserted into the handle to operate the locking mechanism inside the frame of the window. When the handle is turned, it opens the latch on the window, allowing it to open. As time passes and with regular use, espagnolette handles can become damaged or impaired and it is necessary to locate replacements.

Cadenza handles are a different kind of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are more secure than espagnolette handles since they only open from the inside. You can replace them with the same method as you would do for handles made of espagnolette, but make sure the new handle is angled, not flat.

Once you have selected the right handle, simply align the new handle with the existing screw holes prior to screwing it into place. Then, you should put the screws on and test your new handle. This is accomplished by shifting the handle from the locked position to the unlocked and then back to the locked position several times. If you have any issues, it could be worthwhile contacting a professional to determine if they can help resolve the problem. They can advise you on how to solve the issue in a quick and efficient way.