UPVC Window Handle Replacement

Replacing a broken window handle is a relatively easy task and, with the right tools, it can be done quickly. It's important to know what kind of handle you have as well as the size of its spindle before purchasing an alternative.

Older uPVC windows use cockspur window handles which have spurs that protrude to secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and need to be replaced with the same handle.

What kind of lock or handle do you have? I have

There are a variety of window handles made of upvc and locks, each with their own benefits and purposes. The type of handle you have will determine whether or not your locking mechanism is effective and if it is easy to open the windows. With time and regular use the handles made of upvc on your windows may become damaged and worn out. This makes them less secure and effective. In some cases they may even fall completely off. If you find that your window handles have fallen off, it's essential to fix them as soon as possible. This will help prevent burglaries and will keep your home safe.

It's a task that virtually anyone can perform. You will need some basic tools, but with the right knowledge, it is simple and should only take a couple of minutes. It is important to know the type of handle or lock that you have on your window. This will help you choose the right replacement.

Inline Espagnolette Handles

They are the most popular kind of upvc handle and are usually placed on the outside of your window. They have a flat design and have an opening that is connected to the locking mechanism of the window frame when turned. Inline upvc handles have an elongated spindle that runs through middle of the handle and into the window frame in order to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are fitted with a single screw that holds the handle to the window frame and are not as secure as other types of window handles.

Tilt and Turn Handles

In contrast to other handles made of upvc, tilt and turn handles can both be rotated to open the window and the handle can be tilted to the side for ventilation. They typically have a 7mm spindle on the side of the handle. They are available in left and right-handed versions.

When buying replacement upvc handles, it is important to check the spindle length since not all of them are identical in size. Drop something into the middle of the hole to measure the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles operate similarly as doors, with the user turning the handle to open an opening inside the frame. The window can then be opened and closed. These handles can be damaged, especially if often used or are exposed to harsh environments. This can leave you needing to replace your uPVC handles for windows as they may not be able to operate the window properly anymore.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle style uses an individual spindle to lock the window mechanism. This is why it is essential to know what kind of handle you have installed on your uPVC window to find the right glass replacement for windows near me for it.

The base of the handle will inform you what type of uPVC it is. A snap-in cover should be over the screw that holds the handle's base in position. Remove this and then you should be able see the second holding screw on the opposite side of the base of the handle. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.

After you have removed the uPVC window handle you need to carefully unscrew the spindle that was previously attached to the locking mechanism. Take note of the length of the spindle. You'll need purchase a replacement with the same length as the original handle and the locking device.

The spindle wears out and is unable to operate the locking mechanism. This can be caused by corrosion, damage due to frequent use, or an unreliable locking mechanism. If this happens, you'll have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles are susceptible to being damaged or destroyed over time. It is important to fix them as soon as possible to ensure your safety. It is simple to replace a worn or damaged handle. The task can be completed in less than an hour without the need for special tools.

The first step to remove the handle that was previously used is to remove the screw situated at the top of the base of the handle. Once the screw has been removed, the handle can be pulled away. There will be another screw located at the bottom of the handle's base, and it is able to be removed too. Once both of these screws are removed, the handle can be completely detached from the base portion of the window.

Once the old handle is removed, take the new handle and align the fixing holes with the holes currently in the window frame. There may be a tiny sticker or caps on the new handle, so take them off these if necessary and then screw the handle in place. Once the handle is in place it is important to test that it works by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles come with an elongated spindle that extends from the handle and slots into a multipoint locking mechanism inside the window frame. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over the frame's outer or transom bar cross member within the window.

Once you have installed the new handle, slide the spindle inside the window lock and tighten it. Once the handle is firmly fixated, replace the'snap in' cover and screw cap (if necessary). The handle is now ready to use by opening and closing the window several times to ensure that it is working well and securely.

How do I install the new handle?

It's not difficult to change the handle on your Upvc windows. The process is simple. All you need is an screwdriver and a little bit of patience. First, make sure the handle that you are replacing is unlocked. Remove any visible screws. You can also replace them using screw caps. After removing the handle, you'll need to take note of the length of spindle that extends from the back. This is crucial since it will determine the type of handle that you will need to purchase.

Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They feature a spindle that is connected to the handle and acts as an internal locking mechanism within the window frame. The handle opens the latch and allows the window to open. When used regularly and over time, espagnolette handles may become damaged.

Cadenza handles are a different kind of uPVC window handle commonly used on tilt and turn windows. They feature an elongated blade that functions as the multipoint locking mechanism inside the window. They are usually more secure than espagnolette handles as they are only accessible from the inside. You can replace them using the same method as you would with espagnolette handles however, ensure that the new handle is angled and not flat.

After you have picked the right handle, simply align the new handle with the existing screw holes prior to screwing it in place. Then, put the screw covers back on and test that the new handle functions properly. This is accomplished by shifting the handle from the locked to the unlocked position and then back to the locked position several times. It may be worth contacting an expert to see how you can fix any problems. They can often advise you on the best approach to resolve the issue in a speedy and effective way.