Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might think about the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, window Repairs remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you are unable to move the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close the window and perform an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. The most common reason for leaking upvc window repair near me windows is that the sealant surrounding the frame has been damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give assistance.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges due to wear and tear may become displaced, which can cause a gap to form where the sash joins the frame. They can be repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock may also become unbalanced. It is located on the hinge side and might require to be cleaned. In some instances it is possible to replace the hinges.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.