Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However, if you have double pane windows that are held in place by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is large, you might want to consider using a security door repair that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can be affected by a variety of issues such as sliding. A sagging Window repair in uPVC could cause issues with light, draughts and window repair even security. It's important to take action when you realize that your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fit. If you're satisfied with the fit, tighten the screws until they remain in position.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. The majority of the time this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and perform a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be put on. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze It could be hinges at fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Like any mechanical component hinges will be damaged over time. It's very simple to change a window hinge however it is simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide advice.

It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become disaligned as a result of wear, which can cause an opening between the frame and sash. If they're beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be misaligned. This is located on the hinge's side, and could require to be cleaned. In some instances, it may be necessary to replace them.

The next common cause of draughts is the window seals, these can become worn down or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are typically fabric tubes which are filled with a type of filler. They can be put on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it may be cheaper to replace them rather than repair them. If you are having issues with your upvc windows, window repair it's best to seek professional assistance immediately.