Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap is large, you might be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a number of problems, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll need to open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to shut the window and then perform a test fitting. The corners of the sash need to align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if awake each day to find a smoky wall and wet floors. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the old caulking may need to be removed before a new layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease it could be the hinges that are at fault. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window however it is easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to provide assistance.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, which can cause a gap where the sash and frame meet. If they are beyond repair, it may be required to realign them. In addition, the interlock could be disaligned. This is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace these.

The next common reason for draughts are the window seals. These can become worn down or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and they may reach an point at which it is more efficient to replace them than fix them. So, if you're experiencing problems with your upvc window repair near me windows, it's best to seek professional assistance as soon as you can.