Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However when you have double-pane windows that are secured by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance you'll need find some plastic spacers to help the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may think about a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window to access the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. The majority of the time this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and do an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk can be put on. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. This can be easily fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window repairs.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges, also because of wear and tear, could become misaligned. This can cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a good clean, but in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge of the window and can also be misaligned, and again it's possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repair your windows made of upvc will provide excellent security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them than to repair them. If you encounter any issues with your upvc window repair window you should consult a professional immediately.