Double Glazed Window Repair

Double glazing is a fantastic investment in energy efficiency. It prevents heat loss during the winter months and keeps your home cool in summer. The ability to have your double-glazed windows repaired when needed is an excellent way to ensure that they function properly.

Over time your double glazed windows can suffer from issues like condensation and misting. Double glazed windows may become difficult to open and close.

Broken Panes

A stray baseball, a flying pebble from your lawnmowers or even a severe storm could break the double panes of your windows and expose your home to the elements. While a damaged glass window repairs is difficult to repair, it doesn't need to be replaced. The insulated glass that is between two panes of glass is still in good shape So you can repair your double-paned window on your own.

To start, you'll need to take the broken glass out of the frame. This can be an unpleasant task, and you'll want to be careful to stop any glass shards from falling onto the floor or slipping out of the frame. Wear gloves for your hands and use a rag around the broken glass area to prevent further damage or cuts. After removing the broken piece, carefully clean the entire frame of the window to remove any remaining sealant and debris. Sand rough areas of the window frame to create a smooth and even surface to install your new window.

After cleaning the frame after cleaning, you can apply a second layer of glass to the seam where you removed the broken pane. This is the best method to seal and protect your window, and will save you money by preventing drafts and water from entering the home. The next step is to select the material for your glazing. There are several options, including clear tape that is more durable than regular tape and helps prevent further cracking of your window or glazing film, which is similar to clear plastic wrapping. This choice has the benefit that it can be painted to match your frame and can also shield your windows from snow and ice.

Whatever the material you choose, it is important to press glazier's points into the place where the putty joins the frame. They will help hold the new glass in place and assist it stick to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes that you roll over the frame rabbets.

Condensation

If you are experiencing issues with condensation, it is best to call the window manufacturer. Many companies provide warranties and guarantees that cover these problems. Condensation and fogging in the panes of glass is an obvious sign that the seals between your windows have been damaged and must be repaired by a professional who will fix both panes.

This process is a little tricky and requires the use of special tools to take off the old one and replace the new one, but it can be accomplished by an expert who will supply the required equipment. Utilizing these tools could be dangerous, however it is best to leave this kind of job to professionals.

Wear safety gloves and glasses if decide to do it yourself. You could be exposed to glass fragments flying around. It is crucial to take out any putty or metal glazing points from the grooves that will be receiving the new window. It is also recommended to brush the frame with wire, and then vacuum or wipe with a damp cloth. After the frame has dried you'll have to purchase a replacement piece of glass that is 1/8" shorter in both directions than your existing window repairs. Make sure the glass fits into the grooves.

You'll require a layer of silicone caulk into the grooves of your frames to ensure that your glass is securely installed. After the caulk dries and is dry, you must smooth it and make any necessary adjustments. The wood molding will then be reinstalled.

If the weather suddenly changes, double-glazed windows can become difficult to open and close. Extreme temperatures can cause the frames to shrink or expand and cause them to fall or stick. You can try wiping the frames with water and then lubricating them if this is the case however, it's better to seek advice from the company who installed your windows.

Misunderstood

Misted Double Glazing is a problem with windows that is caused by moisture getting trapped between the glass panes of your double glazed windows. Double glazing is comprised of two panes of glass that are separated by an insulating area, typically filled with argon gas to provide improved thermal efficiency. This creates a airtight seal that keeps warm air inside, and cold outside air out.

The seal may fail over time, and water can accumulate between the glass panes which can cause them to turn misty. This happens because the space between the panes is heated by the sun, which causes water vapour to build up in it.

This is a normal thing to happen but if it happens between the window panes, it can cause a problem as it will no longer be able to regulate the temperature of the room and will allow the outside temperature to influence the indoor temperature. If you notice your double-glazed windows are turning cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single blow sealed unit without the need to replace the entire window. This is far less disruptive than a complete replacement. Our misty window repair involves taking off the glass unit, washing it, and then replacing it with a fresh one to create a watertight seal again.

Certain companies in the business claim to inject chemicals through holes drilled into windows with mist to remove the fog and condensation. We don't suggest this method. This method isn't just ugly, but it could also harm your toughened glass leaving you with a window which isn't functioning properly.

If you don't address the issue immediately it could result in mould, which can not only harm the window, but could also pose health risks to your loved ones. Moisture can also cause other problems in your home, like dampness or rot. In some instances, the window may need to be completely replaced.

Failed or blown

Modern double glazed windows have two glass panes that have an inert gas or air in between them. This increases their thermal efficiency by keeping heat in and cold out. Over time the gas will become depressurised and cause a variety of problems.

One of the most frequently encountered is condensation that forms between the panes. It's not an indication of a window failing however it could indicate that you should replace the panes. Condensation could be a sign your double glazing has failed in which case it should be replaced completely.

You should also look out for draughts that are coming from your double glazed windows. This could be due to an unsound seal or a damaged handle or a damaged lock. It is crucial to address the issue as quickly as you can. A draft will force you to pay more for heating. You can test the seals by feeling around the edges of your window frame to determine whether you feel cold air.

Another indication that your window seals are failing is when you begin to see water dripping on the inside of your windows. This is an indication that you need to seal your double-glazed windows.

The window frames you have purchased were designed to move slightly, which is necessary to keep the glass sheets in their place. However, over time this special packaging material can become compacted and this will break the all-important seal. This allows air to flow between the panes, decreasing the energy efficiency of your window.

Double glazing that has ruptured seals is a sign of failure and should be fixed immediately. A damaged seal can stop your double glazing from performing its primary purpose that is to keep the cold out and warm air in. In addition, a blown seal can let moisture in, which can result in mold and other unpleasant conditions. Call a double glazing specialist as soon you spot a damaged window seal. They can replace the entire unit.