How to Replace a Kia Sportage replacement kia car Keys Key

For a variety of Kia models keys, there is a built-in keyless entry system. The key functions like a remote control, and can be exchanged by an Kia dealer.

Key fobs can stop working due to a number of reasons, including a dead battery, worn-out buttons, signal interference or water damage. Here are some helpful tips on how you can get your kia sportage spare key Sportage replacement key to work again.

How to replace a remote key or a smartkey?

Whether your Kia is equipped with an intelligent key, remote key, push-to-start key, or a regular non-transponder steel key the battery in these keys will eventually need replacing. This is particularly relevant if your car displays a message indicating that the smart key or remote has low battery power.

Luckily, this is an easy procedure. To replace the battery on the key fob take the mechanical key from the slit at the back of the key fob. You then need to break the cover. Inside the key fob will be a small screw that holds the battery in the correct position. Using a small screwdriver, take the screw off and remove the battery that was in place. Insert the new battery and close the cut on the key fob.

Once the key fob has new batteries check it by pressing the lock and unlock buttons. If the doors unlock and lock in the same way, you're in good shape! You can now use the hands-free feature to lock and [Redirect-Java] unlock your Kia whenever your fingers start to get chilly or how to find a lost Kia key fob when you need to go on errands around Brandon.

Note: Certain key fobs (transponder chip or smart keys) may need to have their programming completed. This requires a programming machine that is available only to the locksmith in the automotive or dealer. Other keys (non-transponder metal keys) don't require programming. If your key needs to be programmed again, you must be aware of the key code stamped on the tag of the key code and save it in a safe place.

How to replace the battery

If your Kia key fob is not responding when you press the lock or unlock button on the fob, it is a sign that the battery should be replaced. A battery that is not functioning properly could cause other issues, such as the check engine light flashing on or delayed engine cranking. Fortunately, replacing the key fob battery is a relatively simple DIY project that requires only the most basic tools.

Before you begin the process ensure that your vehicle is turned off and that all doors are shut. Find the small metal or plastic piece that is on the bottom of your key fob, and gently jiggle it until the metal key slides out. Then, you can insert the key in the handle of the door for the driver to open your car.

To replace the battery on the key fob, take off the cover on the rear. Use a pry tool to loosen the latch that holds the black negative cable. Remove the old battery, and then align the new one in a way that the "+" positive side is facing your face and the "-" negative side is facing towards the fob's electronic contacts. Avoid using too much force when pushing the new CR2032 into position to avoid breaking or bending the steel contacts.

Once the new battery has been installed and the key fob is turned on, turn it off and back on in the ignition until the door locks cycle. You can then test the Kia's Key fob once more to ensure it's working properly.

How to replace the smart key

Depending on the model of your Kia Sportage, you may have a standard key fob or a smart key. The difference between them is that the smart key has an incredibly small key blade tucked inside it, while the standard fob doesn't. Both key fobs contain batteries that will eventually require replacement. This is a simple procedure which takes just two minutes.

Before you start before you begin, ensure that you are on a level surface with enough lighting and that the Kia is off. Remember that the fob contains small parts that can be thrown off when you're not careful.

The small release button is located on the lower backside. This will either be a circular silver button or a rectangular slot. You can open the key fob by pressing the button.

Once the key fob is opened, take out the old battery. The new battery is CR-2032, and can be bought through the internet or at a local auto parts shop. After installation you should be able to lock and unlock your car with your key fob even if the engine isn't running!

How to replace the mechanical key?

The Kia key fob is a great convenience that allows us to lock and unlock our vehicle with the push of a button. As with all devices it is possible that the Kia key fob can occasionally have problems. There are methods to solve these issues and ensure that our key fobs are in good working condition over the long haul.

A dead or weak battery is one of the most frequent problems. This can cause your fob to stop working or work intermittently. If this is the case then replace the battery with a new one.

If this does not resolve the issue, use an ordinary screwdriver with a flat head to push the fob's casing made of plastic open. Be careful not to damage any internal components, or scratch the plastic. Once the battery is removed and replaced, you can replace it with a brand new battery.

When the new battery is in, close and then open the doors with the mechanical key (every Kia fob has an emergency mechanical key that will fit in the slot). Test the key fob to ensure it's working properly. Contact a dealer locksmith to address the issue if the fob is still not working. Make sure they make you an emergency key that can work in all the trunk and door cylinders in order to avoid future lockouts.