How to Replace a Saab 9-3 Key

The saab key programming 9-3 is a great car that is full of driver appeal. It is powerful and has good visibility. It also has a great safety rating.

However, it is important to ensure that you have at minimum two working keys for your car. If you lose just one key, it could be very expensive to add the new one.

How to replace the ignition Key on a Saab 9-3

If your car's key doesn't turn on and you want to replace it, you'll need to replace it. This guide will guide you through the steps to do it on a Saab 9-3. You will need a replacement key with a reprogrammable battery and a new key-fob cover.

The most modern Saab models make use of transponders instead of a traditional key to unlock the car and start it. The rechargeable batteries contained in the key-fob inevitably wear out, and they will not be able to hold charge. This is especially true if you keep using the same key for the same lock.

A professional locksmith can replace the battery fairly easily. If you have the proper tools and patience, you can do it yourself. The first step is to separate the key-fob. This is accomplished by inserting a flathead screwdriver into the slot located in the middle of the case. You must take your time, as the plastic is very thin and easily damaged.

Once the case has been opened, you can create the new key by combining the lower part of the key from earlier with a transponder and banana. This will ensure that the new key is connected to the CIM correctly, which can be the difference in replacing the original key for your Saab 9-3.

How to Replace the Ignition Key on the Saab 900

If you don't have two keys you'll need to remove the steering wheel and dashboard to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is removed, you can remove all the trim pieces as well as dashboard pieces that surround the steering wheel. After the dashboard has been removed, you can insert an screwdriver into the opening behind the ignition switch.

The ignition cylinder comes with a key lock which could prevent the vehicle from starting if it does not have a key. If the ignition switch isn't working properly, you should check whether the key is within the lock or stuck inside the barrel. It's also recommended to rotate your keys regularly and clean them regularly to ensure that they don't get bent.

Saab cars differ from other vehicles in that they don't utilize traditional metal keys. Instead, the car is able to recognize the electronic signals generated by the key fob through a chip that is specifically designed for it.

If you lose your sole working key fob the dealer will charge you the most expensive dollar for the replacement of your computer module (known as the CIM). But we can reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. This can save you over 50% of the cost the dealer charges! This is the SAAB Key PROGRAM. Find out more about it here!

How to Replace the Ignition Key in a Saab9-5

The metal component of classic Saab keys is simple to copy and doesn't present a major threat to theft of vehicles. The electronic part of the key-fob comes with a chip that recognizes the car when the key is placed in the ignition switch.

Saab has relied on the technology of this anti-theft device for more than a decade. It's not quite as effective as a physical lock for your door but it does make stealing your car much more difficult. Every Saab owner should keep an extra Saab key in their car.

The majority of new Saabs are delivered with two keys. However, they can be added at a dealer using a special handheld device, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 cars, that have more modern, newer features that require a key-fob.

If you lose all keys and the dealer replaces your CIM or TWICE modules and charge you a premium for it. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to replace the ignition Key on an XC90 Saab

If your lost saab key 9-3 key fob begins having issues turning the lock barrel it's possible that it's time to replace it. Fortunately, the process is rather simple and doesn't need you to visit a dealer. You can complete the process at home using just a few basic tools.

The first step is to prepare the new key. Before starting, make sure that the anti-theft device is disabled by placing blocks on the rear wheels, Saab 9-3 Key and then adjusting the handbrake. Then, you can put the key in the ignition and switch it to the on position which activates the accessories, but does not start the engine. Repeat this process five times, and then leave the key in the on position.

You'll then need to purchase an additional case for your key fob. They are readily available at many auto parts stores and are typically very affordable. Based on the model, you may even get them without any electronic components.

To open the case you need to gently push the screwdriver with a flathead into the slot in the middle. After you've separated the case, you will have access to all the internal electronic components. Use a flathead screwdriver to gently remove the electronic components.