Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the door and the window is large, you might want to use an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for fitting. If you're satisfied with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it can also be due to the handle mechanism wearing out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. You'll first need to close the window and do a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's important to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double glazed window repairs near me-glazed glass it is more likely the issue is with the seal rather than the frame. This can be easily fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze It could be hinges that are at fault. They can be replaced by any competent DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change the hinges on a window but it's much simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also become misaligned due to wear, which can cause an opening between the frame and sash. These can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to have them realigned or replaced. The interlock may also become misaligned. This is located on the hinge's side and might require to be cleaned. In certain instances, it may be necessary to replace these.

The next most common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc window repairs near me windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be put on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional immediately.