Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, you will need to locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the window and the door is large, you might prefer an alarm system that has windows. This will give you the best of both.

2. Sagging

upvc window repairs near me windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues such as sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws until they remain in position.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles could also become loose. Most often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window Repair windows are brittle to open, or are loose and open in a breeze, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler when you have a person to help hold the frame up.

Verify that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are always happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become misaligned due to wear, causing a gap where the sash meets frame. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it's possible to just give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. They can become worn down or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. If you have any problems with your Upvc window you should consult a professional as soon as you can.