Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. However, if windows with double glazed window repairs panes are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this instance, you will need to source some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional can come out and fix the window repair near me. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is large, you might prefer security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.

If you cannot reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles may also loosen up. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to replace a hinge on a window however it is easier if someone helps you hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular way or due to improper installation in the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. First, the hinges because of wear and tear, could become misaligned. This will cause gaps to develop where the sash joins the frame. If they're beyond repair, it might be required to realign them. The interlock, which is on the hinge side of the window and can also be misaligned, and again it is feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. These will help to block out cold air and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows will eventually get worn out and it may be cheaper to replace them rather than repair them. If you have any problems with your window made of upvc you should consult a professional as soon as possible.