How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don't be concerned. Replacing a upvc window handle is a relatively simple task and can be completed in just a few steps.

Whether you have a cranked or in-line espagnolette style window handle, they all have a square spindle bar that extends out from the back plate and is slotted into the locking mechanism.

Find out the type and the size of the handle and lock.

Over time window handles and locks could become damaged or lose their function. It is possible to fix this problem without having to replace the entire uPVC unit. The first thing you need to do is to identify the kind and size of the lock and handle. This will help you identify the replacement parts you require.

You can identify the kind of handle by looking at the base. A screw or pin will hold the handle to its base. If the screw is missing, it could be an indication that the handle has split from the base section. If the handle has broken internally and no longer grips onto the spindle, this can also mean that it needs replacement.

There are a variety of uPVC handles however the Espag handle is the most well-known. They are usually fixed with two bolts and have spindles that are connected to the lock mechanism within the frame of the window. These handles are typically used on tilt and turn uPVC windows.

Cockspur handles are another kind of uPVC handle. Similar to the Espag handle, but they have a low projection from the frame. These handles are typically used on older uPVC window frames.

Venetian window handles are a different option. They are similar to Espag handles, but they have a flat bottom that allows them to be positioned flush with the frame. These handles are a good choice for homeowners looking for a stylish handle that will blend with their uPVC frames. These handles come in a variety of colours that can match any design.

Measure the spindle

Before purchasing a new handle, it's important to understand how the original is attached. This will tell you how it is tight or loose and if it can fit properly into the window frame. This can be done by identifying the handle type and determining the spindle's measurement. The spindle is the metal shaft that connects the handle to the lock within the window frame. The spindle is available in a variety of sizes. The current industry standard is 8mm. Older handles might have a 9mm cross-section, therefore it's essential to measure the old one to ensure you get the right size replacement.

There are a variety of window handles, but the most common are inline Espagnolette and the cockspur handle. These handles operate a locking mechanism in the window. They employ shootbolt rods that secure the window once it is closed. They are held in place with pins or screws based on the type of handle you have.

You can buy replacement upvc handles on the internet or in many DIY stores. They are available in a variety of finishes, and are suitable for windows that are new or replacement. They can also be key-locking, or fire-escape non-locking for extra security.

To take off the handle just open the window towards the door and remove all screws that hold it in place. Be careful not to damage the screws, and keep them safe in a container to be stored for future use. After the screws have been removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle to the top. This will provide you with the information needed to buy the right replacement. The spindle of the handle is the metal shaft connecting it to the gearbox that locks the window frame.

Remove the old handle

Switching the handle of a uPVC handle is a simple task that takes just five minutes if you have the appropriate tools. The first thing you need to determine is the kind and size of the handle or lock. This will help you determine the best replacement. After that, measuring the spindle will help ensure that the new handle is a suitable for the job. The old handle will need to be removed and replaced with the new.

Most uPVC handles come with inline Espagnolette handles. They have central spindles that slot into the locking mechanism on the window. They are generally simple to remove, however you may have to apply force to remove them if they are stuck. There are typically two screws that hold the handle in place, which can be removed with either pliers or a screwdriver. There may be a need to remove pins based on the kind of handle.

After the screws have been removed Once the screws are removed, you can remove the old handle. The top of the base plate will be visible once the handle is in an open position, revealing two more screws that you can remove. There's also an unimportant silver or colour sticker that has to be removed if it's in place.

Using the screws from the handle, you are now able to put the new handle in the appropriate position. Align the screw holes on the window to the holes in the handle. After you have done this you can replace the caps on the screws. Test the new handle. Changes to a window made of uPVC can be a quick and simple task, but it's crucial to ensure you complete the task correctly.

Fit the new handle

If you've managed to remove the handle that you have on the frame, it's time to put in the new handle. Start by locating and removing the screw covers with your screwdriver. Once the screw covers have been removed, place them in a secure location before proceeding to the next step.

Next, place the new spindle inside the handle by lining it up with the hole in the handle and screwing it in. Be sure to align the holes of the handle with holes in the window frame. Also, make use of a screw of the same length as the ones previously used, or it could result in the handle not being secure.

uPVC Espag handles are fitted with a 7mm square spindle that turns the lock mechanism installed to the window. This type of handle is utilized in most modern uPVC Windows. uPVC Cockspur handles (also called Cotswold handles) have an extended nose that locks over the frame's outer edge or transom bar cross member and are typically found in older windows made of uPVC.

Once the new handle has been put installed, it's crucial to verify that it functions properly by locking and unlocking the window several times. If all goes according to plan, the new uPVC handle should be securely attached and working smoothly. If you encounter any issues these steps will assist you identify the issue and resolve it quickly. Bridgewater Glass can help you when you're experiencing issues with your uPVC handles or any other glazed home improvements. Our glaziers can repair or replace upvc Window Handle different window handles and frames. This makes us an excellent option for double glazing.

Test the new handle

As time passes and through regular use the uPVC locks and handles are susceptible to damage and wear and wear and. This can leave them less secure and effective which is why it's crucial to replace window handles them as quickly as possible. This is also a good idea to do when you are upgrading your windows. Changing your handle and locking mechanism will ensure the integrity of your new windows.

When it is to uPVC window handles, there are a variety of different styles. Some are secured with pins or screws, replace upvc window handle whereas others feature blades that fit into the lock mechanism. Each type has its own method of replacement, so it's important to know what type you have before you start working on it.

Espag window handles are the most common kind, and are typically found on the latest uPVC windows. They have a spindle that extends from the handle and into the lock gearbox and, when you open the window, it activates the locking mechanism. They're also easy to remove however, replace upvc window handle you must take care not to damage the mechanism or the handle when doing so.

Cockspur handles are another option for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the striker plates that are wedge-shaped on the frame. This kind of handle is more difficult to repair than other types, but it's still an excellent choice for the majority of homes.

Venetian window handles are held by two bolts and have a slim projection from the frame, unlike the Espag handle. They're great if you want an elegant flush handle that blends in with your uPVC windows. These are a great option for commercial and residential properties.