Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like aluminum or timber.

It is important to clean and oil UPVC doors and windows regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. However, if you have double glazed window repairs-pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this situation, you will need to find some plastic spacers to help the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they could be trodden under and UPVC Window Repairs cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the door and the window is significant, you may prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues that include sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if get up each morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze it could be hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a simple process, but it's easier when you have a person to help hold the frame up.

Make sure that the uPVC hinges open and close in the right direction. You can do this by looking for the arrow on each hinge, this shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and upvc window Repairs reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear may become displaced, which will cause gaps to develop where the sash meets the frame. If they're beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it is possible to give them a clean but in some instances it could be necessary to have these replaced.

The next common cause of draughts is the window seals. They can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!

With a little maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.