Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like aluminum or timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this case you'll need to source some plastic spacers to help the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

It's a great idea cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the distance between the door and the window is significant, you may need to consider a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may develop a variety of issues such as sliding. A window repair near me that is sagging can cause problems with light, draughts or even security. It's important to take action when you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for fit. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on how serious the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze it could be hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should open.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you suggestions.

It is also crucial to grease the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window repair - web -.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause an opening to appear where the sash joins the frame. They can be repaired by giving them a good clean, but if they are beyond repair it could be necessary to get them re-aligned or replaced. Second, the interlock can be unbalanced. This is located on the hinge side and may need to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window repairs near me window with low-emissivity glass. which will help regulate indoor temperatures and will reduce the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it is cheaper to replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.