Ghost Immobiliser Installation

Secure your prized possessions from car thieves by adding a ghost immobiliser. Our TASSA verified system protects vehicles against hacking, key cloning and vehicle immobiliser bypass.

The system is hidden in your vehicle's wiring loom and is inaccessible to anyone who is looking. It is operated by generating pin code push sequences by using buttons already present on the steering wheel, door cards, and centre console.

No circuit cuts

A car is a valuable possession that you spend years of hard work to obtain, which is why owners want to protect their car from theft. However, traditional security systems such as alarms and wheel locks can easily be cut off or jumped by thieves. Ghost immobilisers are a highly-effective solution that operates silently and can't be detected by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This generates an individual pincode that is only known by you. The code can be changed at any time, and can include up to 20 numbers based on your preference. It also comes with an emergency code that you could use in case you forget your PIN.

The ghost immobiliser can also be used to block relay boxes from transferring the signal of your car's key from within your home, which would unlock the doors and start the vehicle. It also blocks advanced methods of stealing your vehicle, such as OBD port hacking. The device is tiny and weatherproof, meaning it's hard to spot and even harder to tamper with.

The ghost immobiliser also has an advantage: it can be installed in your vehicle without leaving any permanent marks. It's ideal for those who plan to sell their vehicle in the near future. It's also a lot more efficient and less time-consuming to install than an original factory-fitted system.

The Autowatch ghost immobiliser near me is a groundbreaking next-generation device that prevents vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN. It is a devious system that can be put in place without severing any wires and does not require any additional key fobs. It also connects to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system is TASSA certified and can be connected to an International Security Register, allowing owners to have peace of mind knowing that their vehicles are protected against theft.

No scanning with RF

If you've invested an enormous amount of time and money into the customisation of your vehicle, you will want to safeguard it from theft. One of the best ways to do this is to install an immobiliser. This will prevent your engine from starting unless you enter a unique PIN code. By using the buttons on your steering wheel and dashboard, you can create a PIN up to 20 digits in length that is only accessible to you, ensuring that only you can drive your vehicle. You can also create a valet and service mode that will allow you to temporarily start your car without entering the PIN code. This will permit your technician to work on your car without your presence. This is an excellent option for people who are looking to cut down on time and make their lives easier.

A ghost immobiliser is a next-generation device that connects to the vehicle's CAN data network and utilizes the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to be discreet without any light or sound to signal it and can be installed anywhere on the vehicle without impacting the look of your beloved vehicle.

This stealthy gadget is approved by TASSA and could lower your insurance costs. It has a tracking feature that will locate your vehicle even if it's been stolen. This is useful if you have a costly or rare vehicle that you've spent many hours personalising.

Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your car when you've lost your PIN code or are unable get into your vehicle. This feature is ideal if you have to go on errands or pick up your kids and do not want to let someone else drive your vehicle. This feature is helpful when you need to take your car in to be repaired or serviced.

Another benefit of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it unnoticeable to thieves who employ RF scanning or code technology to capture codes. It can also protect your car from key duplicates, ECU swapping and other typical methods of theft.

There is no key to cloning

Ghost immobilisers can be an excellent way to safeguard high-end cars and prevent key cloning. They prevent your vehicle from starting without a PIN code being entered in conjunction with the regular key fob. This makes it difficult for thieves to steal the vehicle, autowatch ghost immobiliser fitting and could discourage them from trying. This is a great idea if your vehicle has been extensively modified or is a rare model.

These immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden which means there is no visible sign of its presence inside the vehicle. The device is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a thief must spend a lot more time in order to get your vehicle.

To bypass the system thieves must be aware of the pin code and the location of the Ghost. The pin code is specific to you and can be changed as many times as you want. The pin code is easy for Autowatch ghost Immobiliser fitting you to remember but mathematically unattainable for someone else to understand. The engineer will also have provided an emergency pin number in the event that you forget the pin.

The Ghost CAN Bus immobiliser could be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and is completely customizable to match the appearance of your car. It is also extremely affordable and easy to use. You can even transfer the device to a different vehicle if you decide to change vehicles in the course of ownership, providing that the new vehicle is compatible with the.

The immobiliser on the CAN bus is compatible with many other security features. For instance, it can detect damage to your vehicle and alert the owner. It also can stop the engine if the car is damaged. The system will protect your vehicle against hacking and key duplication. It can also detect vibrations or contact with the vehicle. In addition, it could warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost uses an immobiliser hidden in the module that is connected to your vehicle's CAN data network that prevents thieves from hacking into your car to disable the alarm, deactivate the key fob and code new keys. This technology is a major improvement over the traditional methods used by thieves in the past to steal your vehicle. The CAN data network means that the system won't be affected by disconnecting or changing the battery.

The autowatch ghost immobiliser fitting Ghost is the first immobiliser for CAN bus in the world, protects against key-cloning, hacking and replica car theft. It does not utilize LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves can utilize diagnostics to identify circuit breaks in your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated in the wiring. The Ghost is weatherproof, doesn't require additional wiring, and can't be detected by professional diagnostic tools. It can even be fitted on vehicles that are fitted with anti-theft systems.

Another advantage of the ghost immobiliser birmingham immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your vehicle. This is a significant advantage over traditional security systems which can be bypassed by simple screwdrivers or cable tampering.

If you forget your PIN, you can easily reset it using the emergency PIN reset function on a mobile device or computer. This is useful if you are looking to start your vehicle after it has been left in a garage, or using a valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorised installers. It features a QR fingerprint system to identify individual parts, which allows for the return of stolen items if they are found. It can also be switched to'service mode', which allows the engine to be started when your vehicle is in a garage or with valet parking, however, you must enter your PIN again to exit the car.