Fiat 500 Key Fob Replacement

If your 500 key fob fails to function Try a different one to see if the car can detect it. If it does, then the issue is likely with the original fob's battery, or water damage.

First replace the battery. The "+" side should be facing downwards.

Dead Battery

The battery is often the reason for the fob not functioning. It's easy to fix and most fobs will give you a warning when the battery is depleted. You can find the instructions for most car key fobs on YouTube or in the owner's guide. You can also take it to a local locksmith or to the dealer who provided it to you to replace it.

Sometimes a fob will stop functioning due to a malfunction in the internal circuit board. This isn't very common but it is possible to occur. If you drop the fob on a hard object, it can damage the internal chip. It could be a problem if you have an aftermarket fob, and the key doesn't work. In this case you'll need to go to a locksmith or dealer and fiat Ducato key programming get it reprogRammed to work with your 500.

One 2012 fiat punto key fob replacement 500 Flip Key Remote that resembles Ilco brand with trunk, lock and lock buttons. It is a replacement keyless entry remote (will need to be cut and programmed by locksmith)

Chips damaged

A fiat 500 key fob is wireless device that gives the signal for the car to start after you press the button. It has a microchip that holds information about the code needed to communicate with your car. If the chip is damaged, it won't transmit the correct code and the car won't start. A locksmith can repair this type of damage. United Locksmith is capable of completing this service for classic models as well as more recent ones, so don't feel scared to contact them.

Locksmiths can program a new key fob. It's less expensive to do this than go to the dealer, and it works the same way. A locksmith will need some specific details from you, such as the year that your car was manufactured and the model's name.

Rub the chip with an old dollar bill if you're not certain of what to do. The copper in the bill is abrasive, and will remove dirt and oxidation. However, it will not cause harm to the microchip. The chip might not be repairable in the event that it has been physically damaged. This can happen when you drop it or get it pushed over by your vehicle.

Water Damage

Whether you accidentally dropped your keys in the water, put them in your bag while swimming at the beach, or splashed them with water on a rainy afternoon it's likely your fob will have some water damage. Even if it only has a tiny amount of water on the key, it could cause serious issues with its electronics and hinder it from working properly.

It is possible to fix this issue by getting rid of the fob and then cleaning it with a towel. When the fob is dry you can then replace its battery and it should begin working normally.

You can also take your fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These professionals can use special equipment to make sure that the key fob works with your car's computer.

When the key fob on your Fiat 500 stops working, you may feel irritated and overwhelmed. It's expensive and inconvenient to take your key fob to the dealer. A locksmith can replace your key fob without needing to visit an auto dealer. For this reason, they are a superior choice than an auto dealer.

Pairing Issues

If you accidentally drop your keyfob, or it stops working and nothing else appears to be wrong, it could be the chip. It could be due to water damage or a dead battery. it could be that it needs reprogramming.

This is often done by simply following the directions in your owner's manual. However, it's a good idea to have a locksmith from your automotive perform this procedure if you're having trouble or the instructions in your manual don't work for you. This will ensure that the chip is not damaged, and is the cheapest option.

Another issue with 500 owners is that the key fob can't lock the car. This can be a big issue if you're at the gas station to fill up. Some owners have even reported their 500's locking mechanism failing and requiring replacement of the entire steering intermediate shaft. This issue has been described in a technical support bulletin (TSB) from Fiat.

A reputable locksmith will assist you if your Fiat is experiencing issues. They can duplicate your key or make you a brand new one that locks and starts the vehicle. They can make this happen without ever seeing your old key and are usually much less expensive than purchasing it from a dealer.