How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of special steps to install a second ignition key. This requires a handheld computer, called Tech-2 which is to be used by the dealer. Then, a new transponder and key have to be purchased.

Make sure to rotate your keys in order to prevent one from wearing out more than the other. This will also ensure that your keys remain in pristine condition.

Replacement Case

In contrast to the traditional Saab keys of old, the new key fobs contain electronics which makes it more difficult to make a copy. This has made stealing cars significantly more difficult than it was just a few years ago. However, it has made the replacement of lost keys an incredibly expensive undertaking.

Saab 9-3 owners should have two keys that work. If one gets lost saab keys, it costs a lot of money to purchase a new one for the car since it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are a few ways to avoid these costly. Some parts suppliers will find the code on an old key (usually the same one that opens the doors and Wikidot.win/wiki/Ten_Things_Youve_Learned_In_Kindergarden_To_Help_You_Get_Started_With_Saab_Key_Cover switches the ignition) and cut a brand saab Key replacement bristol new key blade out of metal for only a fraction of the dealer's cost. The key must, however, be identical to the original in order to function in your car.

You can also change the case yourself by following these steps. You'll need an open-faced screwdriver and patience. With the screwdriver, break apart the plastic and remove the emergency key. Once you have the case open, remove the electronic components and place them into the new case. Make sure you put the correct badge and key back inside the case, too.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced quickly and easily. This DIY video from YouTube Cyclone Cyd will show you how to replace the battery of the remote key fob in just four steps. This tutorial can be used for any modern saab-type key fob, however the procedure might differ slightly.

The first step is to find the button that lets off the backup key within the fob. This button is usually located next to the Saab logo on the back of the fob. Then, use a flathead screwdriver to insert into the tiny hole in this button. This should be sufficient to open the fob case in order to change the battery.

Once the new CR1632 battery is in place You can then reassemble the remote key fob. You can then program it to your car. The entire process should not be more than an hour. This is a simple procedure that doesn't require special tools.

The process is a bit more complicated in the event that you lose your key, but it is possible. The dealer must first read the VIN of the vehicle and order the replacement TWICE module as well as key blade with the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is a device that locks and unlocks your car. It is equipped with a battery inside. The batteries have a lifespan and will eventually go out of service. This is a common problem that happens to all cars, and the good news is that you can replace the batteries in a majority of key fobs without having to replace the whole case. Amazon sells replacement fobs that have all the electronic components in place. You can simply pop the case open and replace the batteries. You'll need to remove the emergency key before you can replace the batteries. To do this, place a small screwdriver that is flat into the slot in the middle. Use the screwdriver to move around the case until it is split open, making it simple to remove.

If you're ready to change your keys, keep a spare on hand. This can save you a lot of money. If you have an additional key, you can request the dealer to cut the key and program it for your vehicle. This is a lot less expensive than purchasing a new fob.

It is possible to add another key to your car if you don't already have one, however it requires an extensive amount of research and effort. A second key can cost several hundred dollars and it requires programming of the car's computer. Professionals can do this however, it's a costly option.

Replacement Ignition

The current saab 9-3 key fob replacement (their website) 9-3 has an advanced alarm system built on a keycode. If you lose your primary key, it may be costly to purchase a new one, as the car has to include a computer and be programmed to accept a brand new key. Even a dealer can charge hundreds of dollars to program an additional key when they are not able to do it.

Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) in the event that you lose your sole working key. We can reprogram the current EEPROM inside your car's computer to be prepared for a new key. This will save you more than 50% off the price you'd pay the dealer.

If you have owned a SAAB 9-3 an extended period of time you are aware that the ignition keys aren't very durable. If your ignition key is not working properly, you should think about replacing it. They can become very sticky and the buttons have been known to fall off. Fortunately, replacing the ignition key isn't as complicated as it sounds, and it is fairly easy to do using the proper tools.