Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism deteriorated? Perhaps the window or door handles aren't aligned correctly or are difficult to use.

You'll lose energy in the event that your double-glazed doors fail to function properly. This can also increase the chance of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

If a key breaks within a lock, it can be extremely frustrating. It could also be a security issue because it could expose you to an intruder if the door does not lock. There are a few easy solutions you can use to resolve the issue and get your door working again.

Remember to remain calm. If you panic, you could end up pushing the damaged key further into the lock.

Then spray WD-40 or another penetrating oil into the lock to help the broken piece to slide out more easily. You can also make use of a screwdriver to break pieces that could be blocking the way. If you have a part of the key that's stuck out then grab it using a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't have any of these then you can bend a hook with needle-nosed pliers. You can also use a pair of tweezers grab and remove the last bit of the broken keys.

If you cannot remove the broken piece of key Use a lock deicer. It's available at most hardware stores and is used to freeze any moisture present in the lock.

If none of these solutions seem to work, it could be time to call a locksmith. Fitlocks experts can fix issues such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair through us online or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder is an immediate security risk. It's fortunately a simple repair for an expert locksmith to complete. To fix the cylinder locksmiths will need to tap it. This can be accomplished with a hammer or other tool. However, the best method is to use a wire or a long match. Then, place the match's end or wire near the keyway. The locksmith can hit the lock to break it open. This is superior to using a hammer that could cause damage to the lock.

The most common cause of cracks in the head of a cylinder is due to overheating. This can occur when the cylinder block as well as the cylinder head are made of different metals, such as cast iron and aluminum. When different metals heat up and cool down at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in the cylinder is corrosion. If the head and block of the cylinder are not maintained properly they may corrosion or rust, which can cause them to expand more than expected. This can cause cracks over time.

If your uPVC window or door lock is brittle or requires an enormous amount of pressure to turn, it can be the result of several things. A malfunctioning locking mechanism, misalignment or the wear of the handle are typical reasons for this issue.

Fortunately, this is an easy and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith can usually solve the issue within one hour of arriving at the home. They can fix the locking mechanisms, or change the window handles and replace the gearboxes, depending on the specific requirements of your home. A professional locksmith will be able to provide you with a recommendation of the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which offer an additional layer of protection against burglars. This is a small price to pay for the security that comes with knowing your uPVC doors are safe.

Broken Handle

It's not a surprise that window handle locks may break. They have intricate mechanisms that wear out over time. If yours fails, it can be difficult to pinpoint the cause of the problem and make sure that you repair it correctly.

Fixing your broken handle, regardless of whether it's the internal latch or locking mechanism can increase the security of your uPVC door and prevent draughts. It could be costly to repair or replace your handle incorrectly and it could also harm the frame and the lock of your door.

Screwdriver Open the window, loosen the screw holding the handle. This should be located on the inside face of the back plate, which is usually covered by an attractive cover for the screw for aesthetic reasons. You should not lose any internal components of the handle, such as the plates and levers on either side. Ideally, keep them in the same order so that you can re-install them if needed.

Then, install with an additional screwdriver loosen the screw that holds the handle to the spindle at the back. Once the screw is loose, you can remove the handle and take the broken spindle out. Replace it with a brand new one, ensuring it is the same length as the old one (you can typically find these on the internet or at hardware stores) and screw it securely in place. Be careful not to overtighten because this could cause damage to the handle or the window frame.

Ensure the new handle is correctly installed, then close and test the handle. It is likely that it will operate smoothly and you'll be able to open your window again.

While you're working on the handle, don't forget to check your upvc window repairs near me windows are shut correctly. If they aren't closing properly, you could experience draughts or damp in your home. You could also compromise the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on the frames of your windows to ensure they close properly.

Broken Spindle

It is usually the case that the spindle inside the handle is broken, not the handle itself. This is especially typical in uPVC tilt and turn windows. These kinds of windows require a handle which is a lock mechanism that is located in the window frame. The handle is connected to a rod in the centre that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has been damaged This can be a frustrating problem.

There are solutions to this problem. A professional locksmith will be able to quickly and effectively address this issue. A professional locksmith will be able disassemble the handle of the window by using a tool that removes the wheel from the area in which the spindle is. This can be done without damage to the handle or window frame.

After removing the wheel, the technician can inspect the spindle and determine the reason for its break. This involves breaking the spindle into its component parts and carefully recording their general condition as well as any specific areas of wear or damage. This process is usually carried out by technicians in a clean and safe environment.

The next step is to clean the damaged spindle. This will remove any dirt or debris which might be preventing it from operating normally. The spindle may be replaced or repaired. If it's being replaced, the technician could use a dowel of a similar size to the original and drill mating holes in both pieces of the spindle. This will ensure that the new spindle has precisely matched to the handle.

If the damaged spindle cannot be repaired, it might need to be replaced entirely. Home centers can sell generic replacements however if your window design is unusual you'll have to speak with an expert in woodworking or cabinet making who can recreate the exact part. Once the new spindle is in place it can be attached to the handle by lining up the holes for screws in the handle with the frame's existing screws. Once the handle is set, you are able to operate your uPVC windows.