Repairs to uPVC Windows

upvc Window Repair is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, you will need to find some plastic spacers that assist the new pane to fit correctly into the window frame.

If you're planning attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the loose uPVC window handle yourself. You'll first need to close the window and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is essential to act if you awake each day to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens in an ease. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's easy to change a window hinge however it is simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also become misaligned due to wear, which can cause an opening where the sash meets frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. Second, the interlock can also become unbalanced. It is located on the hinge side and could require to be cleaned. In some instances it is possible to replace the hinges.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is always best to seek professional assistance immediately.