peugeot 308 key fob 208 Key Replacement

It is recommended to leave the replacement of Peugeot 208 keys to auto locksmiths with the equipment and know-how. They can design and program keys faster and peugeot 206 key replacement less expensive than dealers.

A dead coin battery is most likely to blame the reason your key-fob stops locking or unlocking doors. There are other possibilities that the key is malfunctioning.

Dead Coin Battery

A dead battery can stop your Peugeot 208 from locking and unlocking, as well as hindering it from starting the engine. If this is the scenario, you'll need utilize the backup starting method which is explained in your vehicle's owner manual.

The spark plugs might also be worn out. The spark plugs are responsible for sparking the fuel which starts the engine. However, they have a limited life span. They'll eventually degrade if they're not used enough.

Fortunately, there's an easy solution to this problem. Verify the voltage of your battery using a multimeter. If it's lower than 11.5 volts then you must replace it. If the battery has corrosion it is essential to clean its contacts. This can be done by lifting the rubber covers that protect the two terminals of the battery and using wire brushes to clean any parts that are corroded from the battery. Then, you should reconnect the positive pole cables to the negative.

Water Damage

If your 208 isn't starting and the battery isn't running, then make sure that the spark plugs are functioning. You might find that they are dirty and do not spark. This can be fixed by cleaning the spark plugs in the workshop.

Peugeot cars have a transponder style key that works with the car's immobiliser system. This ensures only the correct key is able to turn the engine. If the chip inside the Peugeot key is damaged, shop it won't transmit the correct signal to the vehicle.

This is a common problem that is caused by water damage. This is a typical issue in areas with colder temperatures where the vehicle has been exposed to snow or rain. If this is the case, you should contact a reputable auto locksmith who has all the tools and equipment required to reprogram the new key. They will also have all the latest technology and machinery required to make the Peugeot smart key. The process shouldn't take longer than 15 minutes.

Contacts to the battery are not working properly.

Peugeot changed from the old carbon encased transponder chips to a brand new kind of chip that utilizes electronic components within circuit boards. The new system works great when it's brand new, but the circuit boards begin to degrade with time and cease to function properly.

This can prevent the immobiliser chip from triggering and causing your car to not start. Contact a Peugeot specialist, or a locksmith, if this is the case.

A common issue is when the battery inside the key fob begins to fail. This causes the blade of the key to stop feeding into your lock. A car locksmith will replace the battery and then cut a new key blade for you. This is a simple fix.

Faulty Receiver Module

It could be that the receiver module is defective if your Peugeot key fob stops working after being dropped on the floor, or exposed to a stormy rainstorm, or accidentally washed. The receiver module is responsible for transmitting radio frequency to the onboard computer which manages the central locking system of your Peugeot vehicle.

The rubber seals on the key fob block water from getting to the electronic chip. However prolonged exposure to water could penetrate these seals and damage the chip. The high salt content of the pool or ocean waters can cause damage to the key fob if it is submerged.

The module needs to be replaced if the Peugeot spare key is no longer working. This is only performed by a professional auto locksmith or Peugeot specialist. Peugeot keys are, unlike other vehicles, are protected by an immobilizer system. This requires the correct codes to start the car. This is why it is imperative that you should only trust the Peugeot locksmith to create and program the replacement.

Computer with a problem on board

The computer on board in your Peugeot is responsible for a number of the systems inside your vehicle, from power windows to airbags. When something goes wrong in these systems, it will usually display a code that indicates the issue. This code will be saved within the system until the issue is fixed. In most cases, this will require the on-board computer being replaced.

The most common reason for the warning light for the airbag to turn on is corrosion or loose connections in the sensor. This can occur due to wear and tear, aging, or exposure to moisture and salt. It is crucial to get this issue resolved as soon as possible, as a malfunctioning airbag can be dangerous in the event an accident.

If you see an error message that says "card not found" on your Peugeot key fob, the battery inside the key fob may be dead or weak. This prevents the key fob from transmitting a signal that will disable your vehicle's standard immobilizer. You can test this by pressing the unlock button on the key fob, then trying to start your vehicle. If this fails, [empty] then the key battery needs to be replaced.