Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap between the window and the door is significant, you may need to consider an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism getting worn out. It's fairly simple to repair a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, UPVC Window Repairs it's crucial to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or Upvc Window Repairs is missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may require removal before a new layer can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens in an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process but it can be simpler with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by checking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused due to opening the window in the wrong way or a faulty installation in the factory. Sending us a photo through our website can often solve the issue. We are happy to offer advice.

It is also crucial to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window repairs near me operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges, also because of wear and tear, can become misaligned, this causes an opening to appear where the sash meets the frame. These can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. The second is the interlock, which is on the hinge side of the window, may be misaligned. Again, it is possible to give them a clean but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it is more cost-effective to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.