How to Replace a Kia Sportage Replacement Key

For a variety of Kia models the key comes with a keyless entry system built-in. This key is similar to an remote control and Kia Venga Replacement Key can be exchanged by an Kia Venga Replacement Key dealer.

Key fobs are prone to malfunction due to various reasons, such as a dead coin battery worn buttons signals, water damage, signal interference, and a defective receiver module. Here are some helpful tips to help you get your Kia key fob that is a replacement for the sportage again.

How do you replace the remote key or smart key?

No matter if your Kia is equipped with an intelligent key, remote key, push to start key or regular metal non-transponder key The battery inside these keys will eventually require replacement. This is especially when your car displays a message telling you that the remote or smart keys are not powered by batteries.

It's a simple procedure. In order to replace the key fob battery take the mechanical key from the slit in the back of the key fob. Next, remove the cover. A small screw will be located inside the key fob that holds the battery in its place. Take out the old battery by detaching the screw using a small screwdriver. Then insert the new one and close the slit on the key fob.

Once the key fob has a fresh battery, test it by pressing the lock and unlock buttons. If the doors unlock and lock as expected, then you're all set! You can now use the hands-free feature to lock and unlock your kia replacement keys whenever your fingers start to get cold or you have to do some errands in Brandon.

Note: Certain key fobs could need to be programmed (transponder chips or smart keys). This requires a computer that is available only to the automotive locksmith or dealer. Other keys (non-transponder metal keys) don't require programming. If your keys need to be reprogrammed, you must be aware of the key code printed on the key code tag and save it in a safe location.

How do you replace the battery?

If the Kia key fob is unable to respond to pressing the lock/unlock button, it is likely that the battery is not fully charged. A battery that is not functioning properly could cause other issues such as the check engine light flashing on or delayed cranking of the engine. It is easy to replace key fob batteries by using only the use of a few tools.

Before starting the process before beginning the process, ensure that your vehicle is off and all doors are shut. Find the small metal or a plastic piece at the bottom of the key fob. Move it until the key pops out. This key can be put into the driver door handle to unlock your car.

To replace the battery in the key fob, take off the rear cover. Use a pry tool to loosen up the latch that holds the black negative cable. Take the old battery out, and then align the replacement battery to ensure that its "+" side is facing you, and the "-" negative side is facing the fob's electrical contacts. Avoid using too much force when pushing the new CR2032 into position to avoid damaging or bending the metal contacts.

After installing the new battery, turn the key fob off and on in the ignition until the door locks cycle. You can then test the Kia's Key fob to ensure it is working correctly.

How do you replace a smart key

Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The difference between these is that the smart key has tiny mechanical key blade tucked inside it, while the standard fob doesn't. Both key fobs come with an internal battery that will eventually require replacement. This is an easy process which takes just two minutes.

Be sure to turn off your Kia and stand on a level and well-lit surface prior to you begin. Keep in mind that the fob has small parts that can be thrown off in the event of a mishap.

The small release button is located on the lower backside. It could be an oval silver button or a rectangular slot. When you press it the mechanical key blade will appear and you can then open the key fob.

Once you have the key fob open then you can remove the old battery, and replace it. The new battery is a C2032, and can be purchased online or in your local auto parts store. After you've finished you should be able to lock, unlock and start your vehicle with your key fob even if the engine isn't running!

How do I replace the mechanical key?

The Kia keyfob can be a fantastic convenience that lets us lock or unlock our car by pressing the button. But, as with all devices, it can have problems from time to time. There are solutions to resolve these issues and keep your key fobs functioning for a long time.

A dead or weak battery is one of the most frequent problems. The fob could be able to stop working entirely or to work intermittently. If this is the case you should replace the battery with a new one.

If this doesn't solve the problem then try using a normal flathead screwdriver to wedge open the casing of the fob's plastic. Be careful not to scratch any internal components or scratch the plastic. Once open, carefully remove the battery you have been using and replace it with a new one.

Close and open the door using the mechanical key. (Every kia fob comes with a spare mechanical key which will fit into the slot). Test the key fob and make sure it is working correctly. Contact a dealer or locksmith to address the issue in the event that the key fob is not working. To avoid a lockout in the future ensure you have an emergency key that will work in all of the trunk and door cylinders.