Add a Sparkle to Your fiat 500 key cover (Bravejournal official website) 500 Key Fob

Add a little fun to your Fiat 500 Key Fob using these adorable Silicone Covers. They're easy to put on and snap onto your original black cover.

The silicone covers shield your keys from dust and splashes. They also make your keys look much more fashionable. The remote control's signals are not affected and continue to work even when the cover is not in place.

Make sure your key is protected from splashes, dust and other contaminants

Add a stylish touch to your key with this silicone cover. It is perfectly positioned around the key fob without sliding. It protects your key from dust and splashes. The signals emitted by your key remote control are not affected by the silicone cover, so you can use the buttons on your key fob as normal.

Accessorize your fiat ducato key replacement 500 in Grey or Black with these cool covers. These covers are perfect when your original cover is looking a little worn, scratched or dented. The covers are made from high-quality silicone and come with two key rings so that you can swap them out in case you become bored of one color.

These covers replace the stock, black key cover that is on your vehicle. It is necessary to remove the original key cover first before you can install these covers.

Looks great

Fiat is a distinctive and well-known Italian brand and their cars are adorned with an incredible design that makes them stand out from the crowd. These sparkly car key covers are a simple and enjoyable way to add a little glamour to your keys, without being too overpowering. They look fantastic on your key fob, and can be used to refresh an old one.

These covers snap easily into the desired position and are designed to replace your original black cover. It is a good idea to remove the cover before installing this.

They are available in Grey and black. The fiat logo is printed on both. You can always alter it when you want to! They are also great gifts for Fiat 500 owners.

Easy to install

Fiat 500 key covers are an easy way to freshen your car keys. You can choose from a wide range of styles and colors to choose the one that matches your personality. The best part is that they're simple to install, so you can install them within a matter of 10 minutes. You'll only need a screwdriver and some patience. The first step is to remove the original cover from your key. This must be removed before the new cover can be fitted.

After you have removed the old cover Once you have removed the old cover, use a flathead screwdriver to pry out the four main attachment clips on the passenger side of the fob assembly. These are marked in red in the image below. Also, note the tabs for locating slots in yellow that require disengagement as well.

After taking the battery off, replace it with a new CR2032 3 volt coin cell battery. Make sure that the "+" positive side of the battery is pointing to the opening on the fob and that the"-" negative side is facing the buttons made of rubber.

Reattach the passenger side mirror cover by aligning the tabs that locate it. After you've done this place the fob that's on the driver's side back into your car and test it. Press the push button on the front of the key. If everything is working correctly, the parking lights should be on and the doors should automatically close.

Easy to remove

Fiat 500 Key Covers are a delightful way to refresh your key fob. They're simple to install and provide a unique appearance. They also protect your key fob from scratches and smudges. To install a new cover, first you'll need to remove the old one from your vehicle.

This is easily done by pressing the red "Fiat" button located on the front of your key fob. By pressing the button, you will release the lever that allows you to pull out the metal key ignition switch (1). After you have removed the key, you'll be able to see an elongated silver switch with images of a locked and [empty] unlocked padlock on top of it. This is the key fob battery switch. It is simple to change the battery by turning the switch quarter turn with an inexpensive screwdriver that is flat.

The key fob comes with a microchip inside that is used to communicate with the Body Control Module (BCM). When you insert your Fiat key it presses a button on the ignition switch. This is used to remind you of the "key-inignition". The BCM will then be capable of reading the transponder in the key fob to verify that it's valid.

You can also add the twin pack of sport design for a fun, unique look to your key covers. The covers snap onto the original cover. They are available in Cream or Silver. The key cover is only functional if you remove the black cover from your key fob.