Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a dropcloth prior upvc Window Repairs to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor, where they could be trampled.

It's a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap between the door and the window is significant, you may need to consider a security screen that also has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, upvc window Repairs they can suffer from a variety of problems including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need to open the window repairs so that you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. Most often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. The first step is to close your window and do an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens with a breeze. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge however it is easier if someone else helps hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrow on each hinge, this shows which way the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form where the sash joins the frame. They can be repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it may be possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. It is crucial to recognize that windows last for a certain period of time and they may reach a point where it is more economical to replace them than fix them. If you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.