Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is important to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. However, if you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, you will need to find some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled.

It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, upvc window repairs they could be affected by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you cannot reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. You'll first need to close the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or Upvc Window Repairs are loose and blow open in a breeze, it may be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges will be damaged over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do when you have a person to help hold the frame in place.

Verify that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrow on each hinge, this shows which way the window should open.

The problem can be caused due to opening the window in the wrong way or due to a poor installation in the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also lower the possibility of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. They can be fixed by giving them a good clean, but if they are beyond repair it could be necessary to get them aligned or replaced. The interlock may be unbalanced. It is located on the hinge side and might require to be cleaned. In some instances it is possible to replace the hinges.

The next common cause of draughts is the window seals. They can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some type of filler. They can be put on the top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you encounter any issues with your upvc window repairs near me window, it's best to consult a professional as soon as you can.