Fiat 500 Key Fob Replacement

If your 500 keyfob ceases working, you can use a different one to determine if it will be detected by the car. If it does, the problem is most likely due to the original fob's battery, or water damage.

First replace the battery. The "+" side should be facing downwards.

Dead Battery

The majority of the time, when a fob isn't working it's just because the battery is dying. It's easy to fix, and most fobs give you a warning if the battery is running low. You can find the correct procedure on YouTube for almost every car's key fob or look in the owner's manual. You can also take it to a local locksmith or the dealer who gave it to you to replace it.

Sometimes a fob stops working due to a problem on the circuit board inside. This is a bit rare but it can happen. If you drop the fob onto something hard, it can damage the internal chip. It can also happen if you are using an aftermarket fob, and where to Get a fiat key cut the key doesn't work. In this scenario it is required to visit a dealer or locksmith to have the key reset to make it compatible with your 500.

One 2012 fiat punto key replacement cost FIAT 500 flip key remote - resembles Ilco with locks, unlocks and trunk buttons - new replacement keyless entry (will require cutting and program by locksmith).

Damaged Chip

fiat 500 key cover 500 key fobs are wireless devices that send a signal to the car when you press the button. It's equipped with a microchip, which contains the code that is needed to communicate with the car. If the chip is damaged, it can't send the correct code, and the car will not start. Locksmiths can repair this kind of damage. United Locksmith can complete this repair on both traditional and newer models, so don't hesitate to call.

You can purchase a new fob and have it professionally programmed by locksmiths. This is less expensive than visiting a dealer and it works exactly the same way. You'll need some information for the locksmith, such as the year your vehicle was manufactured and its model.

If you're not sure of the best solution to this problem, try rubbing the chip with the help of a US dollar bill. The copper on the bill is abrasive enough to get rid of dirt and oxidation however, it won't cause harm to the microchip. The chip might not be repaired if it is physically damaged. This can happen if you lose it, drive it over with your vehicle or other form of physical force.

Water Damage

Whether you accidentally dropped your keys in the pool, put them in your bag while swimming at the beach or splashed them with water during a rainy day, it's likely that your fob may have water damage. Even if there is only a small amount of water on the key, it can cause serious problems to its electronic components.

It is possible to fix this problem yourself by taking the fob out and cleaning it using a paper towel. After the fob is dry you can replace the battery. It should then start working properly.

You can also take your key fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These professionals can use special equipment to make sure that the key fob works with your car's computer system.

If the key fob of your Fiat 500 stops working, you may feel frustrated and stressed. It's costly and time-consuming to take your key fob to the dealer. Locksmiths can handle all aspect of your car's key fob replacement without the requirement of a dealership trip. They are a better choice than the dealership.

Pairing Issues

If you lose your keyfob, or it stops functioning and nothing else seems to be wrong, it could be the chip. It could be due to water damage or a dead battery.

This can be accomplished by simply following the directions in the owner's manual. However it's recommended to hire an automotive locksmith perform this procedure if you're having problems or if the directions in your manual aren't working for you. This will ensure that the chip isn't fried, and it's also the most economical alternative.

Another issue with 500 owners is that the key fob doesn't secure the car. This could be a problem if you plan to fill up at the gas station. Some owners have reported their 500's locking mechanism failing and having to replace the entire steering intermediate shaft. Fiat has actually addressed this problem in a technical bulletin (TSB).

A reputable locksmith can help you in the event that your Fiat is having problems. They can duplicate your existing key or create a new one that will unlock and start your car. They're able to accomplish this without having to see your previous key and are usually much less expensive than purchasing it from a dealer.