Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall on the fabric instead of onto the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional arrives to fix the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is substantial, you may prefer security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. Over time, they can be affected by a variety of issues that include sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll have to open the window to get to the frame. Then, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles could also loosen. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do a test fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer is applied. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double glazed window repairs near me-glazed glass, it is more likely that the issue is related to the seal, not the frame. A Upvc Window Repair specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease It could be hinges at fault. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical part hinges are prone to wear out over time. It's very simple to change a window hinge but it's much simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become misaligned due to wear, which can cause an opening where the sash and frame meet. If they are damaged beyond repair, it may be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also become misaligned, again it is possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with an expert immediately.