Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, you will need to find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor and could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional comes out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window repair and check for fit. If you are happy with the size of the window, tighten the screws to keep them in place.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen up. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer is applied. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with a breeze. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical component hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler if you have someone to assist in holding the frame in place.

Check that the uPVC hinges are open and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window repairs easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, may become displaced, which causes a gap to form between the sash and the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it may be necessary to have them realigned or replaced. The interlock may be misaligned. This happens on the hinge side and could require to be cleaned. In some instances it might be necessary to replace these.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are typically made of fabric filled with some kind of filler. They can be put on the windowsill on top. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc window you should consult an expert immediately.