Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor [Redirect Only] which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the door and the window is substantial, you may want to use security screens that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sagging. A sagging uPVC window can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window so that you can get to the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close your window and do an experiment to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may need to be removed before a new layer of caulk can be applied. It is crucial to remember that when it comes to upvc window repairs [see this page], do avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. The process of replacing a hinge on a window is an easy process, but it's easier when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be more than happy to give you advice.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, creating an opening where the sash meets frame. If they are beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be disaligned. It is located on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next common reason for draughts are the window seals. These can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair, your upvc window repair near me windows will continue to provide a great level of security and insulation for your home. It is crucial to realize that all windows have a life span and there may come an point at which it is more economical to replace them than repair them. If you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.