Window Repairs

Window repairs can help homeowners save money and keep their homes comfortable. Window replacements may be required in the event of serious damage like broken glass or a broken window frame.

Many other problems can be fixed to extend the life of windows. The most frequent issues are:

Broken or cracked panes

Glass that is cracked can be caused by a lawnmowers that throws rocks in the wrong direction or Window repairs branches of trees being blown by strong winds. This is not only visually bad, but it can result in more energy costs because the broken pieces allow cold air in to your home. Luckily, it's typically simple to repair windows with cracked panes.

Start by carefully removing glass with gloves and safety sunglasses. You may have to use a utility knife to break loose any remaining putty or glazing compound that has accumulated around the edges of the frame. Then, use a gentle paper towel or cloth to clean the surface of both the glass and the wood of the frame.

After cleaning the area, apply silicone caulking that is waterproof to the frame's perimeter. This will prevent water from getting into the frame through the cracks and cause further damage.

A bad crack in double-paned glass may affect the gas between the panes, which can make your windows less efficient in insulating. If the crack is severe enough that it is threatening the structural integrity of the window or the inner pane is missing you might need to contact a professional.

Cracks in the glass caused by thermal stress may occur when there is an extreme temperature difference inside and outside your home. The glass is then able to expand and contract. If the cracks are on two sides of a glass, it is best to replace it instead of try to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It can also keep out cold and bugs. You can cut an area of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This isn't a long-term solution however it's a great solution in a pinch and keeps cold air and insects out of your home. If your windows are older and you're beginning to notice cracks in the glass It's recommended to consult with your local window manufacturer about whether replacing the entire window might be a better solution for you.

Rotten Wood

Wood rot is among the most common problems with windows. It can alter the appearance of a home and can also be a safety risk. It is possible to fix rotted wood. First, you need to ensure that the cause of the rot has been taken care of. Examine for leaks in the roof and other areas where water could get into the wood.

You will then need to remove the rotten parts of the window frame. This can be done with a rasp, chisel or claw hammer. After the rotten areas have been removed it is time to replace them with new wood. It is recommended to make use of pre-treated wood for this project since it is resistant to rot. If you are unable replace the wood that has been damaged You can try using wood hardener or filler to help strengthen the damaged area. Most hardware stores will sell this kind of product. To achieve the best results, adhere to the instructions on the label.

After you have repaired the rotten areas of the windowsill, it's crucial to safeguard the newly repaired area. You can do this by applying a water-resistant wood sealant. Sikkens for instance, is a great product to use.

You can also use a two-part epoxy filler to protect the wood from further damage. It is easy to apply and gives an excellent finish. It is important to follow the directions on the label. After the epoxy filler has dried, you can sand the wood's surface. Start with a rough sandpaper, and then move on to more smoother grades.

The final thing you would like to do is make the area that has been damaged by exposing it to more water. It is a good idea, so, to cover the surface repaired with an oil-based prime which will shield it from moisture. After that, Window Repairs you can reapply the wood sealant, which is waterproof.

The Won't open

A window that isn't opening could be due to a variety of reasons. The house might have shifted or the wooden frames might have warped due to humid weather. Someone might have also nailed them shut for security. However, with a bit of patience and the right tools, most windows that are stuck can be opened.

Accumulated debris or gunk can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges, and locks. Additionally, hardware made of metal may get rusty when in contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease can prevent corrosion and keep your window working correctly.

The pulleys used to raise or lower the window can be loosened, or break. These components may lose tension and cause obstruction especially when the window is situated two or more stories above the ground.

If you have trouble opening a door, use a pry-bar to gently open the window. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window repair. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A damaged spring can be the reason for windows that don't lift or lower. You'll need to check your owner's guide for more details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they cannot open, it's probably time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows in your home go from functional to inoperable. If a window isn't properly shut could make your home vulnerable to burglary and water damages. Contact our team today for more information about our replacement windows and our services!